OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE2614BT-R

P1-P3P4-P6P7-P9P10-P11
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 4
PA Logic Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE2614BT-EK1 evaluation board,
all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
VENH
Logic High Voltage
(Module On)
- 1.6 3.3 3.6 V
VENL
Logic Low Voltage
(Module Off)
- 0 - 0.4 V
IENH
Input Current Logic
High Voltage
- - 330 400* A
IENL
Input Current Logic
Low Voltage
- - 2 10 A
*due to on chip pulldown resistor
Switch Logic Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE2614BT-EK1 evaluation board
(de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
VCTL_ON
Control Voltage
(On State)
- 1.6 3.3 3.6 V
VCTL_OFF
Control Voltage
(OFF State)
- 0.0 - 0.4 V
T
switch
T/R Switching Speed
VCTL_OFF -> VCTL_ON
VCTL_ON -> VCTL_OFF
200 - nSec
CCTL
Control Input
Capacitance
- - - 1 pF
Switch Control Logic Table
Allowed Switch Logic
CPORT1 CPORT2 CTX PORT1
– ANT PORT2
– ANT TX-ANT
ON
OFF OFF
ON
OFF OFF
OFF
ON
OFF OFF
ON
OFF
OFF OFF
ON
OFF OFF
ON
All Other States Not Supported
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 5
AC Electrical Characteristics
802.11g/n Transmit Characteristics
Conditions: VCC = EN = CTX = 3.3 V, CPORT1 = CPORT2 = 0 V, TA = 25 C, as measured on Skyworks
Solutions’ SE2614BT-EK1 evaluation board, all unused ports terminated with 50 ohms, unless
otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FIN Frequency Range - 2400 - 2500 MHz
POUT Output Power
54 Mbps OFDM signal, 64
QAM, 3% EVM
- 18 - dBm
ACPR,
IEEE
Mask
Spectral Mask
P
OUT = 20 dBm, 11 Mbps
CCK, BT = 0.45
11 – 22 MHz
22 – 33 MHz
-
-35
-55
- dBc
P1
dB
P1dB - - 25 - dBm
S21 Small Signal Gain - - 30 - dB
S21_T
Small Signal Gain vs
Temp
Measured at single freq
from -40°C to 85°C
-1.5 +1.5 dB
S21
Small Signal Gain
Variation
Gain variation over single
40MHz channel
Gain Variation over band
-
-
0.5
1.1
-
-
dB
S213.2 Gain @ limit 3.2Ghz 3206 to 3312 MHz - 10 15 dB
2f
Harmonics
POUT = 20 dBm, 1 Mbps,
DSSS
- -50 -45 dBm/MHz
3f - -50 -45 dBm/MHz
tdr, tdf
Delay and rise/fall
Time
50 % of V
EN edge and
90/10 % of final output
power level
- 0.2 - s
S11 Input Return Loss - - 10 - dB
STAB Stability
CW, P
OUT = 20 dBm
0.1 GHz – 20 GHz
Load VSWR = 6:1
All non-harmonically related outputs less than
-42 dBm/MHz
RU Ruggedness
P
IN
= 12dBm,
Load VSWR = 6:1
No permanent damage
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 6
Receive and BT Characteristics
Conditions: VCC = 3.3 V, EN = CTX = 0 V, T
A = 25 C, as measured on Skyworks Solutions’ SE2614BT-EK1
evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 2400 - 2500 MHz
RXIL Insertion Loss
CPORT1 = 0 V and CPORT2 =
3.3 V
or
CPORT1 = 3.3 V and CPORT2 =
0 V
- 1.2 -
dB
RXRL
Return Loss
PORT1 or PORT2
15 20 -
dB
BTIL
Insertion Loss
-
- 1.2 -
BTRL
Return Loss
PORT1 or PORT2
15 20 -
dB
T
on/off
T/R on/off switching
speed
Switching speed between T/R
modes. V
cc0
=3.3V.
200 250
nSec
ANTR
ISOL
Isolation between
ANT and
PORT1/PORT2
Difference in signal level on
PORT1 or PORT2 when
transmitting from TX.
CTX = 3.3V, CPORT1 =
CPORT2 = 0V
PORT1 and PORT2 terminated
in 50ohm.
- 25 - dB
P1-P3P4-P6P7-P9P10-P11

SE2614BT-R

Mfr. #:
Buy SE2614BT-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Front End 2.4GHz 802.11bgn 3.3Volt -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet