Micrel MICRF505BML/YML
October 2006 36
M9999-103106
+1 408-944-0800
2 LD_en Lock detect function (1=enable)
1 PF_FC1 Prefilter corner frequency 2.bit Ref. Table 5
0 PF_FC0 Prefilter corner frequency 1.bit Ref. Table 5
0000010 7 CP_HI High charge-pump current (0=125uA, 1=500uA)
6 SC_by Bypass of Switched Capacitor filter (1=enable)
5 VCO_by “0” mandatory. Bypass of VCO (1=enable)
4 PA_by Bypass of PA (1=enable)
3 OUTS3 Test pins output 4.bit Ref. Table 8
2 OUTS2 Test pins output 3.bit Ref. Table 8
1 OUTS1 Test pins output 2.bit Ref. Table 8
0 OUTS0 Test pins output 1.bit Ref. Table 8
0000011 7 IFBias_s “1” mandatory.
6 IFA_HG “1” mandatory. High gain setting in preamplifier
5 VCO_Bias_s
“0” mandatory. Select separate bias for VCO on
VCOBias pin (1=enable)
4 VCO_IB2 VCO bias current setting, 3. bit (111 = highest current)
3 VCO_IB1 VCO bias current setting, 2. bit
2 VCO_IB0 VCO bias current setting, 1. bit
1 VCO_freq1 Frequency setting of VCO, 2. bit (11=highest frequency)
0 VCO_freq0 Frequency setting of VCO, 1.bit
0000100 7 Mod_F2 Modulator filter setting, MSB (0=filter active)
6 Mod_F1 Modulator filter setting
5 Mod_F0 Modulator filter setting, LSB
4 Mod_I4 Modulator current setting, MSB
3 Mod_I3 Modulator current setting
2 Mod_I2 Modulator current setting
1 Mod_I1 Modulator current setting
0 Mod_I0 Modulator current setting, LSB
0000101 7 --------- Reserved/not in use
6 --------- Reserved/not in use
5 Mod_FHG “0” mandatory. Modulator Test bit.
4 Mod_shape “1” mandatory. Modulator shape enable
3 Mod_A3 Modulator attenuator setting, MSB (1=attenuator active)
2 Mod_A2 Modulator attenuator setting
1 Mod_A1 Modulator attenuator setting
0 Mod_A0 Modulator attenuator setting, LSB
0000110 7 --------- Reserved/not in use
6 Mod_clkS2 Modulator clock setting 3.bit, MSB
5 Mod_clkS1 Modulator clock setting 2.bit
4 Mod_clkS0 Modulator clock setting 1.bit, LSB
3 BitSync_clkS2 BitSync clock setting 3.bit, MSB
2 BitSync_clkS1 BitSync clock setting 2.bit
1 BitSync_clkS0 BitSync clock setting 1.bit, LSB
0 BitRate_clkS2 Bitrate clock setting 3.bit, MSB
0000111 7 BitRate_clkS1 Bitrate clock setting 2.bit
6 BitRate_clkS0 Bitrate clock setting 1.bit. LSB:
5 RefClk_K5 Reference clock divider 6.bit, MSB
4 RefClk_K4 Reference clock divider 5.bit
3 RefClk_K3 Reference clock divider 4.bit
2 RefClk_K2 Reference clock divider 3.bit
1 RefClk_K1 Reference clock divider 2.bit
0 RefClk_K0 Reference clock divider 1.bit, LSB
0001000 7 SC_HI “1” mandatory. High current in Switched Cap filter
6 ScClk_X2 “1” mandatory. Switched Cap clock multiplied by two
5 ScClk5 SwitchCap clock divider 6.bit MSB
