FUJITSU SEMICONDUCTOR
SUPPORT SYSTEM
F
2
MC Series
BGM ADAPTER
MB2146-09
OPERATION MANUAL
SS01-00022-1E
PREFACE
Thank you for purchasing the F
2
MC * series BGM adapter (model number MB2146-09).
The product is a development support tool for developing and evaluating applied products which
use Fujitsu microcontrollers (hereafter MCUs) incorporating BDSU modules.
This manual describes how to handle the F
2
MC series BGM adapter. Be sure to read it before
using the product.
For information on the MCUs supported by this product, contact the Fujitsu sales or support
representative.
* : F
2
MC is the abbreviation used for FUJITSU Flexible Microcontroller, which is a Fujitsu
product.
For Your Safety
This manual contains important information required for using the product safely. Be sure to read
through the manual before using the product and follow the instructions contained therein to use
it correctly.
In particular, carefully read “Caution of the products described in this manual” at the beginning
of this manual to understand the requirements for safe use of the product before using it.
After reading the manual, keep it handy for future reference.
Warranty and Liability
The specifications of the product are subject to change without notice.
Fujitsu assumes no liability for any loss or damage whatsoever directly or indirectly arising out
of the use of the product.
Related Manuals
You should refer to the following manuals as well:
“HARDWARE MANUAL” for each type of microcontroller
“DATA SHEET” for each type of microcontroller
“SOFTUNE Workbench OPERATION MANUAL”
“SOFTUNE Workbench USER'S MANUAL”
“SOFTUNE Workbench COMMAND REFERENCE MANUAL”
Caution of the products described in this manual
Cautions in he following correspond to the product described in this manual.
WARNING
The wrong use of a device will give an injury and may cause
malfunction on customers system.
Fire,
Electric shock,
Damage
Never open the case of the product. Do not modify the product
without permission.
Do not damage, revamp, put anything heavy on, strain, forcibly bend,
twist, or heat the product.
Doing so may cause a fire, electric shock, or damaged.
Fire,
Electric shock,
Damage
If any foreign matter (such as water, metal chip, liquid) is let in the
product, turn off the power immediately, then contact the Fujitsu sales
or support representative.
Using the product as it is can cause a fire, electric shock, or damaged.
Fire,
Electric shock,
Damage
Do not use the product in a water place such as a bathroom or shower
stall.
Doing so may cause a fire, electric shock, or damaged.
Fire,
Electric shock
Do not use the product with a damaged, failure, or discontinuity.
Using the product as it is can cause a fire or electric shock.
Fire,
Electric shock
If something goes wrong with the product, for example, if it overheats
or gives out an abnormal odor or noise, turn off the power
immediately.
Make sure that the symptom has been removed, then ask the Fujitsu
sales or support representative for repair. Never try to repair the
product on your own as it is dangerous.
Using the product with the symptom can cause a fire or electric shock.
Fire,
Damage
Use the product within its specified ratings.
Failure to do so can cause a fire or damaged.
Fire,
Damage
Do not leave the product at a dusty, moist, or ill-ventilated place or a
place close to fire.
Doing so can cause a fire or damaged.
Fire,
Damage
Before the product is left unused for an extended period of time, be
sure to turn off all the power for safety.
Failure to do so may cause a fire or damaged.
Electric shock,
Damage
Do not put a finger or anything into the connector of the product.
Doing so can cause an electric shock or damaged.
Electric shock
Do not touch the product with your hand wet.
Doing so can cause an electric shock.

MB2146-09

Mfr. #:
Manufacturer:
Cypress Semiconductor
Description:
TOOL KIT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet