3
3. Connecting the Adapter
■ System Configuration
Connect the adapter between the host machine and the user system so that the adapter can serve
as an emulator under control of the host machine. For using emulator debugger software on the
host machine, refer to the “S
OFTUNE Workbench OPERATION MANUAL”.
Figure 3 shows the system configuration.
➀USB cable
➁Interface cable (adapter's flat cable)
Figure 3 System Configuration
■ Connection to the Host Machine
Connect the adapter to the host machine using the USB cable.
Figure 4 shows how to plug the USB cable.
Figure 4 Plugging the USB Cable
Connection to the USB
connector of the adapter
Adapter
Adaptor
Host
machine
User
interface
connector
➀
➁
MCU
User system
Adapter
interface
connector
MB2146-09