CAUTION
Indicates a potentially hazardous situation which, if not avoided by
following the instruction stated, may result in minor or moderate injury
and/or damage to the product or the equipment to which the product is
connected, to software resources such as data, or to other properties.
Cuts, Damage
Before moving the product, be sure to turn off all the power and unplug
the cables. Watch your steps when carrying it.
Do not use the product at a place exposed to strong vibration or an
unstable place such as a sloping place.
Doing so may let the product fall, resulting in an injury or damaged.
Damage
Keep the product away from direct sunlight, high temperature, and high
humidity to prevent condensation.
Do not use or store the product where it is exposed to much dust or a
strong electric or magnetic field for an extended period of time.
Doing so may cause a damaged.
Damage
To prevent electrostatic breakdown, do not let your finger or an object
touch any metal part of the connector.
Before touching the product, touch a metal object (such as a door knob)
to discharge static electricity from your body.
Failure to do so may cause a damaged.
Damage
Do not apply shock to the product.
Doing so may cause a fault.
Damage
When unplugging the cable, be sure to hold its connector.
Pulling the cable itself may expose or disconnect the cable core,
resulting in a damaged.
The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information, such as descriptions of function and application circuit examples, in this document are presented solely
for the purpose of reference to show examples of operations and uses of Fujitsu semiconductor device; Fujitsu does not
warrant proper operation of the device with respect to use based on such information. When you develop equipment
incorporating the device based on such information, you must assume any responsibility arising out of such use of the
information. Fujitsu assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as
license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of
Fujitsu or any third party or does Fujitsu warrant non-infringement of any third-party' s intellectual property right or other
right by using such information. Fujitsu assumes no liability for any infringement of the intellectual property rights or
other rights of third parties which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for general use,
including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not
designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless
extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal
injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air
traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for
use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in
connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such
failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or technologies subject to certain restrictions on export under
the Foreign Exchange and Foreign Trade Law of Japan, the prior authorization by Japanese government will be required
for export of those products from Japan.
©2004 FUJITSU LIMITED Printed in Japan
1
1. Checking the Delivered Product
Before using the product, make sure that your package contains the following items:
BGM adapter * : 1
USB cable (1.8 m) : 1
Operation manual (Japanese version)) : 1
Operation manual (English version - This document) : 1
*: Hereafter called the adapter.

MB2146-09

Mfr. #:
Manufacturer:
Cypress Semiconductor
Description:
TOOL KIT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet