8735BI-01 Data Sheet
REVISION 1 04/02/15 19 LOW SKEW, 1-TO-5, DIFFERENTIAL-TO-3.3V LVPECL/ECL
FANOUT BUFFER
32-Lead VFQFN Package Outline and Package Dimensions
Package Outline - NL Suffix for 32 Lead VFQFN
Table 9. Package Dimensions
NOTE: The drawing and dimension data originates from IDT
package outline drawing PSC-4171, Rev. 05.
1. All dimensions are in millimeters. All angles are in degrees.
2. Coplanarity applies to the exposed pad as well as the
terminals.
Coplanarity shall not exceed 0.08mm.
3. Warpage should not exceed 0.10mm.
All Dimensions in Millimeters
Symbol Minimum Nominal Maximum
N 32
A 0.80 0.90 1.00
A1 0.00 0.02 0.05
A3 0.2 Ref.
b 0.18 0.25 0.30
D & E 5.00 Basic
D2 & E2 3.00 3.15 3.30
e 0.50 Basic
L 0.30 0.40 0.50
LOW SKEW, 1-TO-5, DIFFERENTIAL-TO-3.3V LVPECL/ECL
FANOUT BUFFER
20 REVISION 1 04/02/15
8735BI-01 DATA SHEET
Ordering Information
Table 10. Ordering Information
NOTE: Parts that are ordered with an “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.
Part/Order Number Marking Package Shipping Packaging Temperature
8735BYI-01LF ICS8735BI01L 32-Lead LQFP, Lead-Free Tray -40°C to 85°C
8735BYI-01LFT ICS8735BI01L 32-Lead LQFP, Lead-Free Tape & Reel -40°C to 85°C
8735BKI-01LF ICS735BI01L 32-Lead VFQFN, Lead-Free Tray -40°C to 85°C
8735BKI-01LFT ICS735BI01L 32-Lead VFQFN, Lead-Free Tape & Reel -40°C to 85°C
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in
this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether
express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This
document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or
other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as
those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected
names, logos and designs, are the property of IDT or their respective third party owners.
Copyright ©2015 Integrated Device Technology, Inc.. All rights reserved.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com
Tech Support
email: clocks@idt.com

8735BKI-01LF

Mfr. #:
Manufacturer:
Description:
IC CLK GEN LVPECL ZD 1:5 32VFQFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet