© Semiconductor Components Industries, LLC, 2015
April, 2015 − Rev. 2
1 Publication Order Number:
KLI−2104/D
KLI-2104
Linear CCD Image Sensor
Description
The KLI−2104 Image Sensor is a high dynamic range,
multi-spectral, linear solid-state image sensor designed for demanding
color scanning applications.
The KLI−2104 contains three parallel linear photodiode arrays, each
with 2098 active photosites for the detection of red, green, and blue
(R, G, B) signals. A fourth channel, comprised of 4,196 pixels,
provides high resolution luminance information. This combination
allows the KLI−2104 to provide high resolution scans with accurate
color reproduction.
The device offers high sensitivity, low noise, and negligible lag.
Table 1. GENERAL SPECIFICATIONS
Parameter Typical Value
Architecture Quadri-Linear CCD
Total Number of Pixels
Chroma
Luma
3 × 2222
1 × 4244
Number of Active Pixels
Chroma
Luma
3 × 2098
1 × 4196
Pixel Size
Chroma
Luma
14 mm
7 mm
Inter-Array Spacing
G to R, R to B
B to L
84 mm
87.5 mm
Active Image Size 29.4 mm (Diagonal)
Chip Size 35.64 mm (H) × 1.06 mm (V)
Saturation Signal
Chroma
Luma
208,000 e
140,000 e
Output Sensitivity
12 mV/e
Peak Quantum Efficiency
R; G; B; L
73%; 55%; 62%; 88%
Responsivity
R; G; B; L
33; 36; 56; 16 V/mJ/cm
2
Total Read Noise 30 e
Dark Current
Chroma
Luma
0.22 pA/Pixel
0.07 pA/Pixel
Dynamic Range
Chroma
Luma
80 dB
75 dB
Charge Transfer Efficiency 0.99999
Photoresponse Non-Uniformity 15% Peak-Peak
Operating Frequency 20 MHz per Output
Package CERDIP
Cover Glass Options MAR Coated, 2 Sides
NOTE: Parameters above are specified at T = 25°C unless otherwise noted.
Features
Quadri-Linear Color Array Design
(G, R, B, L) for High Resolution with
Accurate Color Reproduction
High Sensitivity Photosites
Low Noise Design with Negligible Image
Lag
Pixel-Summing Support for Extended
Sensitivity and Dynamic Range
5.0 V Clock Inputs with Two-Phase
Register Clocking
Choice of Multi-Layer Anti-Reflective
Coated (MAR) or Clear Coverglass
Applications
Digitization
Photography
www.onsemi.com
Figure 1. KLI−2104 Linear CCD
Image Sensor
See detailed ordering and shipping information on page 2 o
f
this data sheet.
ORDERING INFORMATION
KLI−2104
www.onsemi.com
2
ORDERING INFORMATION
Table 2. ORDERING INFORMATION − KLI−2104 IMAGE SENSOR
Part Number Description Marking Code
KLI−2104−DAA−EB−AA Color (RGB), No Microlens, CERDIP Package (Leadframe),
Clear Cover Glass (No Coatings), Standard Grade
KLI−2104
Lot Number
Serial Number
KLI−2104−DAA−EB−AE Color (RGB), No Microlens, CERDIP Package (Leadframe),
Clear Cover Glass (No Coatings), Engineering Grade
KLI−2104−DAA−ED−AA Color (RGB), No Microlens, CERDIP Package (Leadframe),
Clear Cover Glass with AR Coating (Both Sides), Standard Grade
KLI−2104−DAA−ED−AE Color (RGB), No Microlens, CERDIP Package (Leadframe),
Clear Cover Glass with AR Coating (Both Sides), Engineering Grade
See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention
used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at
www.onsemi.com
.
KLI−2104
www.onsemi.com
3
DEVICE DESCRIPTION
Architecture
Figure 2. Block Diagram
VidB
VidR
VidG
12 Dark2098 Active Pixels12 Dark2 Blank
12 Dark
(ea.)
4196 Active Pixels Total
12 Dark
(ea.)
2 Blank
(ea.)
VidO
VidE
4 Blank
(ea.)
4 Blank
Figure 3. Single Channel Schematic, Chroma and Luma
4 Blank
Cells
2 Blank
Cells
2098 Active Pixels 12 Dark12 Dark
TG 2C
IGC
IDC
f1C
f2C
f2SC
VDDC
RDC
fRC
VID
Sub
F.D.
TG 1C
Sub
Chroma Channel Schematic (Not Drawn to Scale)
Sub
4196 Active Pixels24 Dark 24 Dark
4 Blank
Cells
2 Blank
Cells
IGL
f1L
f2L
Sub
4 Blank
Cells
2 Blank
Cells
TGL
IDL
f1L
f2L
Sub
VDDL
RDL
Sub
VIDO
Sub
F.D.
VDDL
RDL
Sub
Sub
F.D.
fRL
fRL
Luma Channel Schematic (Not Drawn to Scale)

KLI-2104-DAA-ED-AA

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Image Sensors LINEAR CCD IMAGE SENSOR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet