1. General description
The TJA1022 is a dual LIN transceiver that provides the interface between a Local
Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN
network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd
and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, ISO 17987-4:2016 (12 V LIN)
and SAE J2602. The TJA1022T and TJA1022TK (SO14/HVSON14 packages) are pin
compatible with the TJA1020, TJA1021, TJA1027 and TJA1029; the TJA1022HG
(DHVQFN24 package) is pin compatible with the TJA1024 (see Section 18
). The
TJA1022, TJA1024, TJA1027 and TJA1029 are software compatible.
The transmit data streams generated by the protocol controller are converted by the
TJA1022 into optimized bus signals shaped to minimize ElectroMagnetic Emissions
(EME). The LIN bus output pins are pulled HIGH via internal termination resistors. For a
master application, an external resistor in series with a diode should be connected
between pin V
BAT
and each of the LIN pins. The receivers detect receive data streams on
the LIN bus input pins and transfer them via pins RXD1 and RXD2 to the microcontroller.
Power consumption is very low when both transceivers are in Sleep mode. However, the
TJA1022 can still be woken up via pins LIN1/LIN2 and SLP1_N/SLP2_N.
2. Features and benefits
2.1 General
Two LIN transceivers in a single package
LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, ISO 17987-4:2016 (12 V LIN) and SAE J2602
compliant
Baud rate up to 20 kBd
Very low ElectroMagnetic Emissions (EME)
Very low current consumption in Sleep mode with remote LIN wake-up
Input levels compatible with 3.3 V and 5 V devices
Integrated termination resistors for LIN slave applications
Passive behavior in unpowered state
Operational during cranking pulse: full operation from 5 V upwards
Undervoltage detection
K-line compatible
Available in SO14, HVSON14 and DHVQFN24 packages
Leadless HVSON14 (3.0 mm 4.5 mm) and DHVQFN24 (3.5 mm 5.5 mm)
packages with improved Automated Optical Inspection (AOI) capability
TJA1022
Dual LIN 2.2A/SAE J2602 transceiver
Rev. 3 — 24 May 2018 Product data sheet
TJA1022 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 24 May 2018 2 of 28
NXP Semiconductors
TJA1022
Dual LIN 2.2A/SAE J2602 transceiver
Dark green product (halogen free and Restriction of Hazardous Substances (RoHS)
compliant)
14-pin variants pin-compatible with TJA1020, TJA1021, TJA1027 and TJA1029
24-pin variant pin-compatible subset of the TJA1024
Software-compatible with the TJA1024, TJA1027 and TJA1029.
2.2 Protection
Very high ElectroMagnetic Immunity (EMI)
Very high ESD robustness: 8 kV according to IEC 61000-4-2 for pins LIN1, LIN2 and
V
BAT
Bus terminal and battery pin protected against transients in the automotive
environment (ISO 7637)
Bus terminal short-circuit proof to battery and ground
Thermally protected
Initial TXD dominant check when switching to Normal mode
TXD dominant time-out function
3. Quick reference data
4. Ordering information
Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
V
BAT
battery supply voltage limiting values 0.3 - +42 V
operating range 5 - 18 V
I
BAT
battery supply current Sleep mode (both channels); bus recessive (both
channels); V
LINx
=V
BAT
; V
SLPx_N
=0V
2.5 7 10 A
Standby mode (both channels); bus recessive
(both channels); V
LINx
=V
BAT
; V
SLPx_N
=0V
2.5 7 10 A
Normal mode (both channels); bus recessive
(both channels); V
TXDx
=5 V; V
LINx
= V
BAT
;
V
SLPx_N
= 5 V
300 1600 3200 A
V
LIN
voltage on pin LIN pins LIN1 and LIN2; limiting value; with respect
to GND and V
BAT
42 - +42 V
V
ESD
electrostatic discharge voltage on pins LIN1, LIN2 and V
BAT
; according to IEC
61000-4-2
8- +8kV
T
vj
virtual junction temperature 40 - +150 C
Table 2. Ordering information
Type number Package
Name Description Version
TJA1022T SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
TJA1022TK HVSON14 plastic, thermal enhanced very thin small outline package; no leads;
14 terminals; body 3 4.5 0.85 mm
SOT1086-2
TJA1022HG DHVQFN24 plastic dual in-line compatible thermal enhanced very thin quad flat
package; no leads; 24 terminals; body 3.5 5.5 0.85 mm
SOT815-1
TJA1022 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 24 May 2018 3 of 28
NXP Semiconductors
TJA1022
Dual LIN 2.2A/SAE J2602 transceiver
5. Block diagram
Pin numbers for the DHVQFN24 package are shown in brackets.
Fig 1. Block diagram
32:(5215(6(7$1'
81'(592/7$*('(7(&7,21
7-$

7(03(5$785(
3527(&7,21
&21752/
%86
7,0(5



6/3B1
7;'
5;'
'20
7,0(5
%86
7,0(5
*1'
DDD


9
%$7
/,1

/,1



6/3B1
7;'
5;'
'20
7,0(5
9
%$7

TJA1022TK,118

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
LIN Transceivers DUAL LIN 5-18V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet