IGD616
Preliminary Data Sheet
IGBT-Driver.com Page 5
Pin Description
No. Pin Name Function
1-16 Primary-side terminal
1- 4 GND Power supply and logic ground
5- 8 Physically not present
9 GND Power supply and
logic ground
10 VCC Power supply positive voltage referenced to pin GND
11-14 Physically not present
15 SO+ Status output positive voltage referenced to pin SO-
16 SO- Status output negative voltage referenced to pin SO+
17 IN- For option I: Inverting input referenced to GND
For option N: Functionless CMOS input (must be terminated to logic high or logic low)
18 IN+ For option I: Functionless CMOS input (must be terminated to logic high or logic low)
For option N: Non-inverting input referenced to GND
19-36 Secondary-side terminal
19 ME IGBT collector voltage monitoring input referenced to pin E
20 N.C. Not connected / reserved for future use
21 REF Reference voltage for short-circuit monitoring referenced to pin E
22 E IGBT emitter terminal
23 Cs 16.4V nominal voltage power supply referenced to pin COM
24 COM Common terminal (secondary side ground)
25 G Gate driver output
26-29 Physically not present
30-36 N.C. Not connected / reserved for future use
Not connected pins are designated as N.C.
