STANDARD
SIZE
A
5962-87571
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
H
SHEET
3
DSCC FORM 2234
APR 97
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
X See figure 1 2 Flat package
Y See figure 1 3 Metal can
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings. 1/
Forward voltage (E+ to E-) ........................................................................................ +44 V dc
Reverse voltage (E+ to E-) ........................................................................................ -20 V dc
Breakdown voltage (case to E+ or E-) ....................................................................... ±200 V dc
Rated performance temperature range ..................................................................... -55°C to +150°C 2/
Storage performance temperature range .................................................................. -65°C to +155°C
Lead temperature range (soldering, 10 seconds) ...................................................... +300°C
Thermal resistance (θ
JA
):
MEDIUM
θ
+ θ
(°C/W)
TS 3/
Y 4/ X 4/ Y 4/ X 4/
Aluminum block 30 10 0.6 0.1
Stirred oil 5/ 42 60 1.4 0.6
Moving air 6/
with heat sink 45 --- 5.0 ---
without heat sink 115 190 13.5 10.0
Still air
with heat sink 191 --- 108 ---
without heat sink 480 650 60 30
1.4 Recommended operating conditions.
Supply voltage range (V
CC
) ...................................................................................... 4 V dc to 30 V dc
Operating ambient temperature range ....................................................................... -55°C to +150°C 2/
______
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ Device types 02, 03, 04, and 05 class V rated performance temperature range = -55°C to +125°C.
3/ The time constant is defined as the time required to reach 63.2 percent of an instantaneous temperature change.
4/ Y – 3-pin can; X – 2-pin flat package.
5/ T is dependent upon velocity of oil: average of several velocities listed above.
6/ Air velocity = 9 feet per second.