OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2904958

P1-P3P4-P6P7-P9P10-P12P13-P14
1Description
IEC 62061
SILCL
Safety relay for emergency stop, safety door and
light grid monitoring
PSR-MS60
© PHOENIX CONTACT
Data sheet
Intended Use
The PSR-MS60 safety relay can be used to monitor two-
channel signal generators, e.g.,emergency stop buttons,
safety door locking mechanisms, and light grids, as well as
to control actuators.
The safety relay is equipped with two single-channel en-
abling current paths that drop out without delay according to
stop category 0 and EN60204-1.
The enabling current paths are controlled automatically
once the sensor circuit has been closed.
Features
– Safety relay for emergency stop, safety door, and light
grid monitoring
– Suitable up to category4, PLe (ENISO13849-1),
SILCL3 (EN62061)
– 1 two-channel sensor circuit
– 2 undelayed single-channel enabling current paths
– Fixed screw connection
–6.8mm housing width
WARNING: Risk of electric shock
Observe the safety instructions in the corresponding section!
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
This document meets the same requirements as the original operating instructions in terms of contents and is
valid for all products listed in the “Ordering data” section.
106171_en_02
2015-08-21
PSR-MS60
106171_en_02 PHOENIX CONTACT 2
2Table of contents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 3
4 Technical data ......................................................................................................................... 3
5 Safety notes............................................................................................................................. 6
6 Basic circuit diagram ............................................................................................................... 7
7 Derating................................................................................................................................... 7
7.1 Vertical or horizontal mounting position ..................................................................................... 7
8 Load curve............................................................................................................................... 7
8.1 Ohmic load ........................................................................................................................ 7
9 Function/time diagrams ........................................................................................................... 7
10 Operating and indication elements .......................................................................................... 8
10.1 Connection versions............................................................................................................. 8
10.2 Connection assignment......................................................................................................... 8
11 Mounting and connection ........................................................................................................ 9
12 Startup..................................................................................................................................... 9
13 Calculating the power dissipation .......................................................................................... 10
14 Diagnostics............................................................................................................................ 11
14.1 General states .................................................................................................................. 11
14.2 Error Messages................................................................................................................. 11
15 Application examples ............................................................................................................ 12
15.1 Light grid monitoring/automatic start....................................................................................... 12
15.2 Two-channel control via LPSDO module ................................................................................. 12
15.3 Single-channel control via failsafe controller ............................................................................. 13
16 Revision history ..................................................................................................................... 14
PSR-MS60
106171_en_02 PHOENIX CONTACT 3
Description Type Order No. Pcs. / Pkt.
Safety relay for emergency stop, safety doors, and light grids up to SIL3,
SILCL3, Cat.4, PLe, 2-channel operation, automatic start, 2 enabling cur-
rent paths (1-channel), U
S
=24VDC, fixed screw terminal block
PSR-MS60-2NO-24DC-SC 2904958 1
3Ordering data
4 Technical data
Hardware/firmware version
HW/FW ≥ 00/-- (The technical data and safety characteristics are valid as of the specified
HW/FW version.)
Input data
Rated control supply voltage U
S
24 V DC -15 % / +10 %
Rated control supply current I
S
typ. 40 mA
Input voltage range "0"-signal 0 V DC ... 5 V DC (for safe off)
Typical inrush current 4.5 A (t=120s at U
s
)
< 20 mA (with U
s
/I
x
to S12)
< 20 mA (with U
s
/I
x
to S22)
Current consumption < 5 mA (with U
s
/I
x
to S12)
< 5 mA (with U
s
/I
x
to S22)
Power consumption at U
S
typ. 0.96 W
Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
Filter time 1 ms (at A1 in the event of voltage dips at U
s
)
max. 1.5 ms (Test pulse duration)
min. 7.5 ms (Test pulse rate)
Test pulse rate=5xTest pulse width
Max. permissible overall conductor resistance
(Input and reset circuit at U
S
)
150 Ω
Typical response time at U
s
< 175 ms
Typical starting time with U
s
< 250 ms (when controlled via A1)
Typical release time with U
s
< 20 ms (when controlled via A1 or S12 and S22.)
Recovery time < 500 ms
Maximum switching frequency 0.5 Hz
Operating voltage display 1 x green LED
Status display 2 x green LEDs
Protective circuit Surge protection Suppressor diode
Reverse polarity protection for rated control supply voltage
Output data
Contact type 2 enabling current paths
Contact material AgSnO
2
Minimum switching voltage 10 V AC/DC
Maximum switching voltage 250 V AC/DC
Limiting continuous current 6 A (N/O contact)
Maximum inrush current 6 A
Inrush current, minimum 3 mA
Sq. Total current 72 A
2
(see to derating)
Switching capacity min. 30 mW
Mechanical service life 10 x 10
6
cycles
Output fuse 6 A gL/gG (N/O contact)
4 A gL/gG (for low-demand applications)
P1-P3P4-P6P7-P9P10-P12P13-P14

2904958

Mfr. #:
Buy 2904958
Manufacturer:
Phoenix Contact
Description:
Safety Relays PSR-MS60-2NO- 24DC-SC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet