ADCMP565
Rev. 0 | Page 3 of 16
SPECIFICATIONS
Table 1. ADCMP565 ELECTRICAL CHARACTERISTICS (V
CC
= +5.0 V, V
EE
= 5.2 V, T
A
= 25°C, unless otherwise noted.)
Parameter Symbol Condition Min Typ Max Unit
DC INPUT CHARACTERISTICS (See Note)
Input Common-Mode Range V
CM
−2.0 +3.0 V
Input Differential Voltage −5 +5 V
Input Offset Voltage V
OS
−6.0 ±1.5 +6.0 mV
Input Offset Voltage Channel Matching −8 +1 +8 mV
Offset Voltage Tempco DV
OS
/d
T
5.0 µV/°C
Input Bias Current I
BC
−10.0 +24 +40.0 µA
Input Bias Current Tempco 17 nA/°C
Input Offset Current −5.0 ±0.5 +5.0 µA
Input Capacitance C
IN
1.75 pF
Input Resistance, Differential Mode 100 kΩ
Input Resistance, Common Mode 600 kΩ
Open Loop Gain 60 dB
Common-Mode Rejection Ratio CMRR V
CM
= −2.0 V to +3.0 V 69 dB
Hysteresis ±1.0 mV
LATCH ENABLE CHARACTERISTICS
Latch Enable Common-Mode Range V
LCM
−2.0 0 V
Latch Enable Differential Input Voltage V
LD
0.4 2.0 V
Input High Current @ 0.0 V −10 +6 +10 µA
Input Low Current @ −2.0 V −10 +6 +10 µA
Latch Setup Time t
S
250 mV overdrive 50 ps
Latch to Output Delay t
PLOH,
t
PLOL
250 mV overdrive 280 ps
Latch Pulse Width t
PL
250 mV overdrive 150 ps
Latch Hold Time t
H
250 mV overdrive 10 ps
OUTPUT CHARACTERISTICS
Output Voltage—High Level V
OH
ECL 50 Ω to −2.0 V −1.08 −0.81 V
Output Voltage—Low Level V
OL
ECL 50 Ω to −2.0 V −1.95 −1.61 V
Rise Time t
R
20% to 80% 160 ps
Fall Time t
F
20% to 80% 145 ps
AC PERFORMANCE
Propagation Delay t
PD
1 V overdrive 310 ps
Propagation Delay t
PD
20 mV overdrive 375 ps
Propagation Delay Tempco 0.5 ps/°C
Prop Delay Skew—Rising Transition to
Falling Transition
±10 ps
Within Device Propagation Delay Skew—
Channel to Channel
±10 ps
Propagation Delay Dispersion vs.
Duty Cycle
1 MHz, 1 ns t
R
, t
F
±10 ps
Propagation Delay Dispersion vs. Overdrive 50 mV to 1.5 V 50 ps
Propagation Delay Dispersion vs. Overdrive 20 mV to 1.5 V 50 ps
Propagation Delay Dispersion vs.
Slew Rate
0 V to 1 V swing,
20% to 80%,
50 ps and 600 ps t
R
, t
F
50 ps
Propagation Delay Dispersion vs.
Common-Mode Voltage
1 V swing,
−1.5 V to 2.5 V
CM
5 ps
Equivalent Input Rise Time Bandwidth BW
0 V to 1 V swing,
20% to 80%,
50 ps t
R
, t
F
5000 MHz
ADCMP565
Rev. 0 | Page 4 of 16
Parameter Symbol Condition Min Typ Max Unit
AC PERFORMANCE (continued)
Toggle Rate >50% output swing 5 Gbps
Minimum Pulse Width PW
∆t
PD
from 10 ns to
200 ps < ±50 ps
200 ps
Unit to Unit Propagation Delay Skew ±10 ps
POWER SUPPLY
Positive Supply Current I
V
CC
@ +5.0 V 10 13 18 mA
Negative Supply Current I
V
EE
@ −5.2 V 60 70 80 mA
Positive Supply Voltage V
CC
Dual 4.75 5.0 5.25 V
Negative Supply Voltage V
EE
Dual −4.96 −5.2 −5.45 V
Power Dissipation Dual, without load 370 435 490 mW
Power Dissipation Dual, with load 550 mW
Power Supply Sensitivity—V
CC
PSS
V
CC
67 dB
Power Supply Sensitivity—V
EE
PSS
V
EE
83 dB
NOTE: Under no circumstances should the input voltages exceed the supply voltages.
ADCMP565
Rev. 0 | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
Table 2. ADCMP565 Absolute Maximum Ratings
Parameter Rating
Positive Supply Voltage
(V
CC
to GND)
−0.5 V to +6.0 V
Negative Supply Voltage
(V
EE
to GND)
−6.0 V to +0.5 V
Supply
Voltages
Ground Voltage Differential −0.5 V to +0.5 V
Input Common-Mode
Voltage
−3.0 V to +4.0 V
Differential Input Voltage −7.0 V to +7.0 V
Input
Voltages
Input Voltage,
Latch Controls
V
EE
to 0.5 V
Output
Output Current 30 mA
Operating Temperature,
Ambient
−40°C to +85°C
Operating Temperature,
Junction
125°C
Temperature
Storage Temperature Range −55°C to +125°C
Stress above those listed under Absolute Maximum Ratings may
cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
THERMAL CONSIDERATIONS
The ADCMP565 20-lead PLCC package option has a θ
JA
(junction-to-ambient thermal resistance) of 89.4°C/W in
still air.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.

ADCMP565BP

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Analog Comparators DUAL CHANNEL HIGH SPEED COMPARATOR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet