–2–
OP275–SPECIFICATIONS
OP275
–3–
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±22 V
Input Voltage
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±22 V
Differential Input Voltage
2
. . . . . . . . . . . . . . . . . . . . . . . ±7.5 V
Output Short-Circuit Duration to GND
3
. . . . . . . . . . Indenite
Storage Temperature Range
P, S Packages . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP275G . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature Range
P, S Packages . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . . .300°C
Package Type
JA
4
JC
Unit
8-Lead Plastic DIP (P) 103 43 °C/W
8-Lead SOIC (S) 158 43 °C/W
NOTES
1
Absolute maximum ratings apply to packaged parts, unless otherwise noted.
2
For supply voltages greater than ±22 V, the absolute maximum input voltage is equal
to the supply voltage.
3
Shorts to either supply may destroy the device. See data sheet for full details.
4
JA
is specied for the worst-case conditions, i.e.,
JA
is specied for device in socket
for PDIP packages;
JA
is specied for device soldered in circuit board for SOIC
packages.
ORDERING GUIDE
Model Temperature Range Package Description Package Option
OP275GP –40°C to +85°C 8-Lead PDIP N-8
OP275GS –40°C to +85°C 8-Lead SOIC R-8
OP275GS-REEL –40°C to +85°C 8-Lead SOIC R-8
OP275GS-REEL7 –40°C to +85°C 8-Lead SOIC R-8
OP275GSZ* –40°C to +85°C 8-Lead SOIC R-8
OP275GSZ-REEL* –40°C to +85°C 8-Lead SOIC R-8
OP275GSZ-REEL7* –40°C to +85°C 8-Lead SOIC R-8
*Z = Pb-free part.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate
on the human body and test equipment and can discharge without detection. Although the OP275 features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
REV. C REV. C