Table 13: DDR3 I
DD
Specifications and Conditions – 8GB (Die Revision N)
Values are for the MT41K1G4 DDR3L SDRAM only and are computed from values specified in the 1.35V 4Gb (1 Gig x 4)
component data sheet
Parameter Symbol 1600 1333 Units
Operating current 0: One bank ACTIVATE-to-PRECHARGE I
DD0
846 810 mA
Operating current 1: One bank ACTIVATE-to-READ-to-PRECHARGE I
DD1
1008 954 mA
Precharge power-down current: Slow exit I
DD2P0
144 144 mA
Precharge power-down current: Fast exit I
DD2P1
252 216 mA
Precharge quiet standby current I
DD2Q
432 396 mA
Precharge standby current I
DD2N
432 396 mA
Precharge standby ODT current I
DD2NT
504 468 mA
Active power-down current I
DD3P
468 432 mA
Active standby current I
DD3N
540 504 mA
Burst read operating current I
DD4R
1530 1350 mA
Burst write operating current I
DD4W
1530 1350 mA
Refresh current I
DD5B
3150 3060 mA
Self refresh temperature current: MAX T
C
= 85°C I
DD6
216 216 mA
Self refresh temperature current (SRT-enabled): MAX T
C
= 95°C I
DD6ET
288 288 mA
All banks interleaved read current I
DD7
2340 2160 mA
Reset current I
DD8
180 180 mA
4GB, 8GB (x72, ECC, SR) 240-Pin DDR3L RDIMM
I
DD
Specifications
PDF: 09005aef83ad1229
ksf18c512_1gx72pz.pdf - Rev. K 8/15 EN
16
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.