FEDL610Q439-3
Issue Date: Jun 7, 2011
ML610Q438/ML610Q439
8-bit Microcontroller with a Built-in LCD driver
1/36
GENERAL DESCRIPTION
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as synchronous serial port,
UART, I
2
C bus interface (master), melody driver, battery level detect circuit, RC oscillation type A/D converter, and LCD
driver, are incorporated around 8-bit CPU nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-instruction 1-clock mode by 3-stage pipe line architecture
parallel procesing. The Flash ROM that is installed as program memory achieves low-voltage low-power consumption operation
(read operation) equivalent to mask ROM and is most suitable for battery-driven applications.
The on-chip debug function that is installed enables program debugging and programming.
FEATURES
CPU
8-bit RISC CPU (CPU name: nX-U8/100)
Instruction system: 16-bit instructions
Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division,
bit manipulations, bit logic operations, jump, conditional jump, call return stack manipulations,
arithmetic shift, and so on
On-Chip debug function
Minimum instruction execution time
30.5 s (@32.768 kHz system clock)
0.24 4s (@4.096 MHz system clock)
Internal memory
Internal 128KByte Flash ROM (64K16 bits) (including unusable 1KByte TEST area)
Internal 6KByte Data RAM (61448 bits), 1KByte Display Allocation RAM (1024 x 8bit)
Internal 192-byte RAM for display
Interrupt controller
2 non-maskable interrupt sources (Internal source: 1, External source: 1)
27 maskable interrupt sources (Internal sources: 19, External sources: 8)
Time base counter
Low-speed time base counter 1 channel
Frequency compensation (Compensation range: Approx. 488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
High-speed time base counter 1 channel
Watchdog timer
Non-maskable interrupt and reset
Free running
Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
Timers
8 bits 4 channels (16-bit configuration available)
1 kHz timer
10 Hz/1 Hz interrupt function
FEDL610Q439-3
LAPIS Semiconductor
ML610Q438/ML610Q439
2/36
Capture
Time base capture 2 channels (4096 Hz to 32 Hz)
PWM
Resolution 16 bits 3 channel
Synchronous serial port
Master/slave selectable
LSB first/MSB first selectable
8-bit length/16-bit length selectable
Timer interrupt is used as a serial clock and selection is possible
UART
TXD/RXD 1 channel
Bit length, parity/no parity, odd parity/even parity, 1 stop bit/2 stop bits
Positive logic/negative logic selectable
Built-in baud rate generator
I
2
C bus interface
Master function only
Fast mode (400 kbps@MH), standard mode (100 kbps@1MH, 50kbps@500kHz)
Melody driver
Scale: 29 types (Melody sound frequency: 508 Hz to 32.768 kHz)
Tone length: 63 types
Tempo: 15 types
Buzzer output mode (4 output modes, 8 frequencies, 16 duty levels)
RC oscillation type A/D converter
24-bit counter
Time division 2 channels
Successive approximation type A/D converter
12-bit A/D converter
Input 2 channels
General-purpose ports
Non-maskable interrupt input port 1 channel
Input-only port 10 channels (including secondary functions)
Output-only port 3 channels (including secondary functions)
Input/output port
20 channels (including secondary functions)
LCD driver
Dot matrix can be supported.
ML610Q438: 1344 dots max. (56 seg 24 com)
ML610Q439: 1024 dots max. (64 seg 16 com)
1/1 to 1/24 duty
1/3 or 1/4 bias (built-in bias generation circuit)
Frame frequency selecable (approx. 64 Hz, 73 Hz, 85 Hz, and 102 Hz)
Bias voltage multiplying clock selectable (8 types)
Contrast adjustment (1/3 bias: 32 steps, 1/4 bias: 20 steps)
LCD drive stop mode, LCD display mode, all LCDs on mode, and all LCDs off mode selectable
Programmable display allocation function (available only when 1/1~1/8 duty is selected)
The metal option of only ML610Q439
Type B : 16com x 64seg (seg63 to seg0: segment port)
Type C : 16com x 56seg (seg63 to seg56: output portseg55 to seg0: segment port)
Type D : 16com x 48seg (seg63 to seg48: output portseg47 to seg0: segment port)
FEDL610Q439-3
LAPIS Semiconductor
ML610Q438/ML610Q439
3/36
Type E : 16com x 40seg (seg63 to seg40: output portseg39 to seg0: segment port)
Type F : 16com x 32seg (seg63 to seg32: output portseg31 to seg0: segment port)
Reset
Reset through the RESET_N pin
Power-on reset generation when powered on
Reset when oscillation stop of the low-speed clock is detected
Reset by the watchdog timer (WDT) overflow
Power supply voltage detect function
Judgment voltages: One of 16 levels
Judgment accuracy: 2% (Typ.)
Clock
Low-speed clock: (This LSI can not guarantee the operation withoug low-speed clock)
Crystal oscillation (32.768 kHz)
High-speed clock:
Built-in RC oscillation (2M/500kHz)
Built-in PLL oscillation (8.192 MHz 2.5%), crystal/ceramic oscillation (4.096 MHz), external clock
Selection of high-speed clock mode by software:
Built-in RC oscillation, built-in PLL oscillation, crystal/ceramic oscillation, external clock
Power management
HALT mode: Instruction execution by CPU is suspended (peripheral circuits are in operating states).
STOP mode: Stop of low-speed oscillation and high-speed oscillation (Operations of CPU and peripheral circuits are
stopped.)
Clock gear: The frequency of high-speed system clock can be changed by software (1/1, 1/2, 1/4, or 1/8 of the oscillation
clock)
Block Control Function: Power down (reset registers and stop clock supply) the circuits of unused peripherals.
Shipment
Chip (Die)
ML610Q438-xxxWA (Blank product: ML610Q438-NNNWA)
ML610Q438P-xxxWA (Blank product: ML610Q438P-NNNWA)
ML610Q439-xxxWA (Blank product: ML610Q439-NNNWA)
ML610Q439P-xxxWA (Blank product: ML610Q439P-NNNWA)
144-pin plastic LQFP
ML610Q438-xxxTCZ03A (Blank product: ML610Q438-NNNTCZ03A)
ML610Q438P-xxxTCZ03A (Blank product: ML610Q438P-NNNTCZ03A)
ML610Q439-xxxTCZ03A (Blank product: ML610Q439-NNNTCZ03A)
ML610Q439P-xxxTCZ03A (Blank product: ML610Q439P-NNNTCZ03A)
xxx: ROM code number
Guaranteed operating range
Operating temperature: 20C to 70C (P version : 40C to 85C)
Operating voltage: V
DD
= 1.1V to 3.6V, AV
DD
= 2.2V to 3.6V

ML610Q438P-NNNTC0AGL

Mfr. #:
Manufacturer:
ROHM Semiconductor
Description:
8-bit Microcontrollers - MCU RECOMMENDED ALT 755-10Q438PNNNTC0AAL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union