I
DD
Specifications
Table 14: DDR4 I
DD
Specifications and Conditions – 16GB (Die Revision B)
Values are for the MT40A2G4 DDR4 SDRAM only and are computed from values specified in the 8Gb (2 Gig x 4) compo-
nent data sheet
Parameter Symbol 2666 Units
One bank ACTIVATE-PRECHARGE current I
DD0
828 mA
One bank ACTIVATE-PRECHARGE, word line boost, I
PP
current I
PP0
54 mA
One bank ACTIVATE-READ-PRECHARGE current I
DD1
1044 mA
Precharge standby current I
DD2N
630 mA
Precharge standby ODT current I
DD2NT
900 mA
Precharge power-down current I
DD2P
450 mA
Precharge quiet standby current I
DD2Q
540 mA
Active standby current I
DD3N
738 mA
Active standby I
PP
current I
PP3N
54 mA
Active power-down current I
DD3P
612 mA
Burst read current I
DD4R
2178 mA
Burst write current I
DD4W
2016 mA
Burst refresh current (1 x REF) I
DD5R
1008 mA
Burst refresh I
PP
current (1 x REF) I
PP5R
90 mA
Self refresh current: Normal temperature range (0°C to +85°C) I
DD6N
540 mA
Self refresh current: Extended temperature range (0°C to +95°C) I
DD6E
630 mA
Self refresh current: Reduced temperature range (0°C to +45°C) I
DD6R
360 mA
Auto self refresh current (25°C) I
DD6A
154.8 mA
Auto self refresh current (45°C) I
DD6A
360 mA
Auto self refresh current (75°C) I
DD6A
540 mA
Auto self refresh I
PP
current I
PP6X
90 mA
Bank interleave read current I
DD7
2700 mA
Bank interleave read I
PP
current I
PP7
270 mA
Maximum power-down current I
DD8
450 mA
NVDIMM Power
To provide NVDIMM functionality requires certain NVDIMM controller logic to operate
at all times. The operation of this logic consumes power as described below.
Table 15: DDR4 NVDIMM Power – 16GB
NVDIMM Mode Power (typical) Units Notes
Normal host operation 1.2 Watts 1
16GB (x72, ECC, SR) 288-Pin DDR4 Nonvolatile RDIMM
I
DD
Specifications
CCMTD-1725822587-10375
asf18c2gx72pf1z.pdf - Rev. C 7/17 EN
22
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.