Stewart Connector
Modular Connectors with Circular Shells Product Specification PR041-01
http://www.stewartconnector.com Page 2 of 12
1.0 Objective
This document establishes the performance requirements and outlines qualification tests for modular
connectors produced by Stewart Connector. These products are intended to be terminated onto a cable
and mated to a compatible Stewart modular product.
2.0 Scope
This specification is applicable to modular products in circular shells.
3.0 General
This document is comprised of the following sections (specifications subject to change without notice):
Paragraph Title
1.0 Objective
2.0 Scope
3.0 General
Table 1 Qualification Test Matrix
4.0 Applicable Documents
5.0 General Requirements
6.0 Quality Assurance Provisions
Table 2 Inspection Conditions
7.0 Requalification of Products
8.0 Electrical Requirements
Table 3 LLCR
Figure 1 Bulk Contact Interface LLCR Measurement
Figure 2 Bulk Shield Interface LLCR Measurement
Figure 3 LLCR Measurement Configuration
Table 4 Insulation Resistance
Table 5 DWV (Adjacent Contacts)
Table 6 DWV (Contacts to Shield )
9.0 Mechanical Requirements
Table 7 Mechanical Shock
Table 8 Sinusoidal Vibration
Table 9 Random Vibration
10.0 Environmental Conditions
Table 10 Temperature Life
Table 11 Thermal Shock
Table 12 Temperature / Humidity