67PPC-010-K Datasheet 67PPC-010-K, 67PPC-030-K, 67PPC-020-K | P10-P12

Stewart Connector

Modular Connectors with Circular Shells Product Specification PR041-01

http://www.stewartconnector.com Page 10 of 12

8.4 Dielectric Withstanding Voltage (DWV) Adjacent Contacts:

There shall be no arc over, insulation breakdown or excessive leakage (>1 mA) when tested in

accordance with EIA-364-20 on mated connectors. See Table 7 below:

Table 5

DWV – Adjacent Contacts

Test Voltage Test Duration

(Minutes)

Points of Measurement

1000 VDC

Between adjacent contacts

8.5 Dielectric Withstanding Voltage (DWV) Contact to Shield:

There shall be no arc over, insulation breakdown or excessive leakage (>1 mA) when tested in

accordance with EIA-364-20 on mated connectors. See Table 8 below:

Table 6

DWV – Contact to Shield

Connector Test Voltage Test Duration

(Minutes)

Points of Measurement

All Connectors 1500 VAC

RMS

or 2121 VDC 1 Between contacts and shield

Stewart Connector

Modular Connectors with Circular Shells Product Specification PR041-01

http://www.stewartconnector.com Page 11 of 12

9.0 Mechanical Requirements

9.1 Mechanical Shock:

Mechanical Shock shall be measured in accordance with EIA-364-27, condition A, with

assembled connectors mounted rigidly to table and no discontinuities of >1 microsecond. See

Table 12 below:

Table 7

Mechanical Shock

Wave Type

Velocity

Change

(ft/s)

Number of

shocks

per direction

Duration

Each Face

(milliseconds)

Applied

Energy

(g)

Mutually

Perpendicular

Axis

Half Sine

11.3

9.2 Vibration (Sinusoidal):

Sinusoidal Vibration shall be measured in accordance with EIA-364-28 Test Condition I, with

assembled connectors mounted rigidly to vibrating table and no discontinuities of >1

microsecond. See Table 13 below:

Table 8

Sinusoidal Vibration

Wave Type Amplitude

Frequency

(Hz)

Duration

Each Face

(hours)

Mutually

Perpendicular

Axis

Sine

.06 in. DA

10 to 55

9.3 Vibration (Random):

Random Vibration shall be measured in accordance with EIA-364-28 Test Condition V Letter D,

with assembled connectors mounted rigidly to vibrating table and no discontinuities of >1

microsecond. See Table 14 below:

Table 9

Random Vibration

Frequency

(Hz)

Duration

Each Face

(minutes)

Overall

rms

(g)

Mutually

Perpendicular

Axis

50 to 2000

11.95

9.4 Durability:

Cycles (number of times) 500 mated and unmated

There to be no evidence of any damage or negative impact to form, fit or function.

Stewart Connector

Modular Connectors with Circular Shells Product Specification PR041-01

http://www.stewartconnector.com Page 12 of 12

10.0 Environmental Conditions

Note: Unless otherwise specified, all environmental testing is to be done with the connector in the mated

state.

10.1 Temperature Life:

Temperature life shall be measured in accordance with EIA-364-17, per method A. See Table 16

below:

Table 10

Temperature Life

Temperature (ºC) Duration (hours)

85±2 500

10.2 Thermal Shock:

Thermal Shock shall be measured in accordance with EIA/TIA-568. See Table 17 below:

Table 11

Thermal Shock

Temperature

(±3 ºC)

Number of

Cycles

Duration at Each

Extreme (Minutes)

Test

Condition

40 to +85

10.3 Temperature / Humidity:

Temperature / Humidity shall be measured in accordance with EIA-364-31, Method IV. See

Table 18 below:

Table 12

Temperature / Humidity

Relative

Humidity

(

±3 %)

Low

Temperature

(±2 ºC)

High

Temperature

(±2 ºC)

Cold

Sub-cycle

(±2 ºC)

Cycle

Time

(hours)

Number

Cycles

10.4 Ingress protection:

Tested per IEC/EN 60529, section 14.2.8. Depth up to 1 meter, duration 30 minutes (IP67

versions only).

P1-P3 P4-P6 P7-P9 P10-P12

67PPC-010-K

Mfr. #:

Buy 67PPC-010-K

Manufacturer:

Stewart Connector / Bel

Description:

Ethernet Cables / Networking Cables CABLE RJ45 1M PLUG CAT6 SHIELDED

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

67PPC-010-K

67PPC-010-K

Products related to this Datasheet