6.42
IDT70V9089/79S/L
High Speed 3.3V 64/32K x 8 Synchronous Dual-Port Static RAM Industrial and Commercial Temperature Ranges
19
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
CORPORATE HEADQUARTERS for SALES: for Tech Support:
6024 Silver Creek Valley Road 800-345-7015 or 408-284-8200 408-284-2794
San Jose, CA 95138 fax: 408-284-2775 DualPortHelp@idt.com
www.idt.com
Datasheet Document History
01/18/99: Initiated datasheet document history
Converted to new format
Cosmetic and typographical corrections
Added additional notes to pin configurations
Page 14 Added Depth and Width Expansion section.
06/11/99: Page 3 Deleted note 6 for Table II
11/12/99: Replaced IDT logo
03/31/00: Combined Pipelined 70V9089 family and Flow-through 70V908 family offerings into one data sheet
Changed ±200mV in waveform notes to 0mV
Added corresponding part chart with ordering information
01/10/01: Page 3 Changed information in Truth Table II
Page 4 Increased storage temperature parameters
Clarified TA parameter
Page 5 DC Electrical parameters–changed wording from "open" to "disabled"
Removed Preliminary Status
01/15/04: Consolidated multiple devices into one datasheet
Changed naming conventions from VCC to VDD and from GND to Vss
Removed I-temp footnote from tables
Page 2 Added date revision to pin configuration
Page 4 Added JunctionTemperature to Absolute Maximum Ratings Table
Added Ambient Temperature footnote
Page 5 Added I-temp numbers for 9ns speed to the DC Electrical Characteristics Table
Added 6ns & 7ns speeds DC power numbers to the DC Electrical Characteristics Table
Page 7 Added I-temp for 9ns speed to AC Electrical Characteristics Table
Added 6ns & 7ns speeds AC timing numbers to the AC Electrical Characteristics Table
Page 16 Added 6ns & 7ns speeds grade and 9ns I-temp to ordering information
Added IDT Clock Solution Table
Pages 1 & 17 Replaced ® IDT logo with TM new logo
05/11/04: Pages 1 & 19 Added 7ns speed grade to ordering information
Page 5 Added 7ns speed DC power numbers to the DC Electrical Characteristics Table
Page 8 Added 7ns speed AC timing numbers to the AC Electrical Characteristics Table
12/01/05: Page 1 Added green parts availability to features
Page 18 Added green indicator to ordering information
01/19/09: Page 18 Removed "IDT" from orderable part number
07/26/10: Page 8 In order to correct the header notes of the AC Elect Chars Table and align them with the Industrial temp range
values located in the table, the commercial TA header note has been removed
Pages 10-14 In order to correct the footnotes of timing diagrams, CNTEN has been removed to reconcile the footnotes with
the
CNTEN logic definition found in Truth Table II - Address Counter Control
07/15/14: Page 1 Replaced Industrial 9ns with 12ns. Replaced Low Power Operation Standby from 600mW (typ) to
1.32mW (typ) in the Features
Page 2 Corrected some text typos
Page 5 Removed the 9ns Industrial temp power values for the S & L offering in the DC Elec Chars table
Page 6 Added the 12ns Industrial temp power value for the L offering in the DC Elec Chars table
Pages 8 & 9 Updated the column headings of the AC Elec Chars table to indicate the Commercial and Industrial
speed grade offerings
Page 18 Updated all the Commercial and Industrial speed grade offerings and added
Tape & Reel to Ordering Information
Page 2 & 18 The label PN100-1 changed to PN100 to match the standard package code
Page 18 Corrected Old Flow-through Part number in table 13 to 70V907S/L25 & L30
