M600 M.2 Type 2260/2280 NAND Flash
SSD
MTFDDAV128MBF, MTFDDAV256MBF, MTFDDAV512MBF,
MTFDDAY128MBF, MTFDDAY256MBF, MTFDDAY512MBF
Features
• Micron
®
16nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Compatible with Microsoft eDrive
®
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Device Sleep (DEVSLP), extreme low power mode
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS3 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Dynamic write acceleration
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance
1, 2
– PCMark
®
Vantage (HDD test suite score): up to
87,000
– Sequential 128KB READ: up to 560 MB/s
– Sequential 128KB WRITE: up to 510 MB/s
– Random 4KB READ: up to 100,000 IOPS
– Random 4KB WRITE: up to 88,000 IOPS
– READ/WRITE latency: 120µs/30µs (TYP)
• Reliability
– MTTF: 1.5 million device hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
15
bits read
• Low power consumption
– 150mW TYP
4
• Endurance: Total bytes written (TBW)
– Up to 300TB
• Capacity (unformatted): 128GB, 256GB, 512GB
• M.2 2260 and 2280 form factors
• Secure firmware update with digitally signed firm-
ware image
• Operating temperature
– Commercial (0°C to +70°C)
5
Notes:
1. Typical I/O performance numbers as meas-
ured fresh-out-of-box (FOB) using Iometer
with a queue depth of 32 and write cache
enabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during exe-
cution of MobileMark
®
with DIPM (device-
initiated power management) enabled.
5. Temperature measured by SMART attribute
194.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
M600 M.2 Type 2260/2280 NAND Flash SSD
Features
PDF: 09005aef859ad464
m600_m2_2260_2280_ssd.pdf - Rev. E 3/15 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2014 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
