MAX1740/MAX1741
SIM/Smart Card Level Translators
in µMAX
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICS (continued)
(Figure 1, DV
CC
= +1.8V, V
CC
= +3.0V or +5.0V, SHDN = DV
CC
, CIN = RIN = GND or DV
CC
, IO = V
CC
, DATA = DDRV = DV
CC
,
C
IO
= C
CLK
= C
RST
= C
DATA
= 30pF, T
A
= -40°C to +85°C, unless otherwise noted.) (Note 5)
UNITSCONDITIONS
I
SINK
= 200µA, SHDN = GND, DATA =
CIN = RIN = DV
CC
(MAX1740 only)
0.4
MIN MAXSYMBOLPARAMETER
V
Note 1: V
IL
is defined as the voltage at which the output (DATA/IO) voltage equals 0.5V.
Note 2: V
IH
is defined as the voltage at which the output (DATA/IO) voltage exceeds the input (IO/DATA) voltage by 100mV.
Note 3: Timing specifications are guaranteed by design, not production tested.
Note 4: The maximum CLK frequency is defined as the output duty cycle remaining in the 40% to 60% range when the 50% CIN is
applied. CIN has 5ns rise and fall times; levels are GND to DV
CC
. Input and output levels are measured at 50% of the waveform.
Note 5: Specifications to -40°C are guaranteed by design, not production tested.
Typical Operating Characteristics
(Circuit of Figure 1, DV
CC
= 3.0V, V
CC
= 5.0V, DDRV or DATA = DV
CC
, RIN = CIN = GND, T
A
= +25°C, unless otherwise noted.)