BGS8M2
SiGe:C low-noise amplifier MMIC with bypass switch for LTE
Rev. 5 — 20 August 2018 Product data sheet
1 General description
The BGS8M2 is, also known as the LTE3001M, a Low-Noise Amplifier (LNA) with bypass
switch for LTE receiver applications, available in a small plastic 6-pin extremely thin
leadless package. The BGS8M2 requires one external matching inductor.
The BGS8M2 delivers system-optimized gain for both primary and diversity applications
where sensitivity improvement is required. The high linearity of these low noise devices
ensures the required receive sensitivity independent of cellular transmit power level in
FDD (Frequency Division Duplex) systems. When receive signal strength is sufficient,
the BGS8M2 can be switched off to operate in bypass mode at a 1 µA current, to lower
power consumption.
The BGS8M2 is optimized for 1805 MHz to 2200 MHz.
2 Features and benefits
• Operating frequency from 1805 MHz to 2200 MHz
• Noise figure = 0.85 dB
• Gain 14.4 dB
• High input 1 dB compression point of -3.5 dBm
• Bypass switch insertion loss of 2.2 dB
• High in band IP3
i
of 3.5 dBm
• Supply voltage 1.5 V to 3.1 V
• Self-shielding package concept
• Integrated supply decoupling capacitor
• Optimized performance at a supply current of 5.8 mA
• Power-down mode current consumption < 1 µA
• Integrated temperature stabilized bias for easy design
• Require only one input matching inductor
• Input and output DC decoupled
• ESD protection on all pins (HBM > 2 kV)
• Integrated matching for the output
• Available in 6-pins leadless package 1.1 mm x 0.7 mm x 0.37 mm; 0.4 mm pitch:
SOT1232
• 180 GHz transit frequency - SiGe:C technology
• Moisture sensitivity level 1
