FEDR44V100A-01
MR44V100A
7/18
DEVICE ID
The device ID can be read out.
The ID is constructed with 12bit Manufacture ID and 12bit Device type.
Device ID Read Sequence
1. Next to Start condition, send 0xF8. MR44V100A responds ACK signal.
2. Send the Slave address (WA16 and R/W are “Don’t care”). MR44V100A responds ACK signal.
3. Again next to Start condition, send 0xF9.
MR44V100A responds ACK signal, then outputs 3 bytes of Device ID.
4. Send Stop condition and finish the sequence.
1
s
t
Byte 2
n
d
Byte 3
r
Byte
0x01 0xb0 0x00
Manufacture ID ( LAPIS ) Device Type ( MR44V100A )
SLEEP
MR44V100A can provide SLEEP Mode which suppresses the current consumption more than Standby status.
Transition to SLEEP Mode and Return from SLEEP mode are the following sequences.
Transition to SLEEP Mode
1. Next to Start condition, send 0xF8. MR44V100A responds ACK signal.
2. Send the Slave address (WA16 and R/W are ”Don’t care”). MR44V100A responds ACK signal.
3. Again Next to Start condition, send 0xF8.
MR44V100A responds ACK signal and transits to SLEEP Mode.
4. Send Stop condition, finish the sequence.
Return from SLEEP Mode
1. Next to Start condition, send the Slave address (WA16 and R/W are “Don’t care”.
2. When the device address is matched, Start the operation of returning from SLEEP Mode at the falling edge
of 6th clocks of SCL after Start condition. When the device address is not matched, SLEEP mode will
continue. .
3. Return to standby after the Returning time from SLEEP.
After that, as sending the Slave address and responding ACK signal, MR44V100A is returning from SLEEP.
Caution : When to input Slave address for returning from SLEEP mode, Stop condition is not recognized.
S
T
A
R
T
Slave address
A
C
K
1 0 1 0
A2 A1 X X
S
T
A
R
T
Slave address
1 0 1 0
A2 A1
WA
16
R/
W
X
Returning
Start returning
1 1 1 0 0 1 1
0xF8
S
T
A
R
T
Slave address
S
T
O
P
A
C
K
A
C
K
A
C
K
0
1 0 1 0
A2 A1 X X
1 0 0 1 100
0x86
S
T
A
R
T
0
1 1 1 0 0 1 1
0xF8
S
T
A
R
T
Slave address
D
7
D
0
S
T
O
P
A
C
K
A
C
K
A
C
K
Read data
D
7
D
7
N
A
C
K
0
1 0 1 0
A2 A1 X X
1 1 1 0 011
0xF9
S
T
A
R
T
1
D
7
D
0
Read data
A
C
K
D
7
D
0
Read data
Device type Manufacture ID
A
C
K
FEDR44V100A-01
MR44V100A
8/18
Software Reset
Software reset is executed to avoid malfunction after power ON, and during command input.
SCL
SDA
Start condition x 9
2 3 56 8974 1
Normal command
FEDR44V100A-01
MR44V100A
9/18
ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
The application of stress (voltage, current, or temperature) that exceeds the absolute maximum rating may
damage the device. Therefore, do not allow actual characteristics to exceed any one parameter ratings
PIN VOLTAGES
Parameter
Symbol
Rating
Unit Note
Min. Max.
Pin Voltage (Input Signal)
V
IN
–0.5
V
CC
+ 0.5
V
Pin Voltage (Input/Output Voltage)
V
INQ
, V
OUTQ
–0.5
V
CC
+ 0.5
V
Power Supply Voltage
V
CC
–0.5 4.0 V
TEMPERATURE RANGE
Parameter
Symbol
Rating
Unit Note
Min. Max.
Storage Temperature
Tstg –55 125 °C
Operating Temperature
Topr –40 85 °C
OTHERS
Parameter
Symbol Rating Note
Power Dissipation
P
D
1,000mW Ta=25°C

MR44V100AMAZAATL

Mfr. #:
Manufacturer:
Description:
F-RAM FeRAM/1Mbit 128Kbx8 8pin SOP 3.4MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet