OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EL5175ISZ-T13

P1-P3P4-P6P7-P9P10-P12P13-P15
1
®
FN7306.7
EL5175, EL5375
550MHz Differential Line Receivers
The EL5175 and EL5375 are single and triple high bandwidth
amplifiers designed to extract the difference signal from noisy
environments. They are primarily targeted for applications such
as receiving signals from twisted-pair lines or any application
where common mode noise injection is likely to occur.
The EL5175 and EL5375 are stable for a gain of one and
requires two external resistors to set the voltage gain for
each channel.
The output common mode level is set by the reference pin
(V
REF
), which has a -3dB bandwidth of over 450MHz.
Generally, this pin is grounded but it can be tied to any
voltage reference.
The output can deliver a maximum of ±60mA and is short
circuit protected to withstand a temporary overload condition.
The EL5175 is available in the 8 Ld SOIC and 8 Ld MSOP
packages and the EL5375 in the 24 Ld QSOP package. All
are specified for operation over the full -40°C to +85°C
temperature range.
Pinouts
EL5175
(8 LD SOIC, MSOP)
TOP VIEW
EL5375
(24 LD QSOP)
TOP VIEW
Features
• Differential input range ±2.3V
• 550MHz 3dB bandwidth
• 900V/µs slew rate
• 60mA maximum output current
• Single 5V or dual ±5V supplies
• Low power, 9.6mA per channel
• Pb-free available (RoHS compliant)
Applications
• Twisted-pair receivers
• Differential line receivers
• VGA over twisted-pair
• Differential to single-ended amplification
• Reception of analog signals in a noisy environment
1
2
3
4
8
7
6
5
-
+
OUT
VS-
VS+
EN
FB
IN+
IN-
REF
1
2
3
4
16
15
14
13
5
6
7
12
11
9
8
10
20
19
18
17
24
23
22
21
REF1
INP1
INN1
NC
REF2
INP2
INN2
NC
REF3
INP3
INN3
NC
NC
FB1
OUT1
NC
VSP
VSN
NC
FB2
OUT2
EN
FB3
OUT3
-
+
-
+
-
+
Ordering Information
PART
NUMBER
PART
MARKING PACKAGE
PKG.
DWG. #
EL5175IS* 5175IS 8 Ld SOIC (150 mil) MDP0027
EL5175ISZ*
(Note)
5175ISZ 8 Ld SOIC (Pb-free)
(150 mil)
MDP0027
EL5175IY* 5 8 Ld MSOP (3.0mm) MDP0043
EL5175IYZ*
(Note)
BAAAB 8 Ld MSOP (Pb-free)
(3.0mm)
MDP0043
EL5375IU* EL5375IU 24 Ld QSOP (150 mil) MDP0040
EL5375IUZ*
(Note)
EL5375IUZ 24 Ld QSOP (Pb-free)
(150 mil)
MDP0040
*Add “-T7” or “-T13” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Data Sheet August 25, 2010
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005, 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN7306.7
August 25, 2010
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: T
J
= T
C
= T
A
Absolute Maximum Ratings (T
A
= +25°C) Thermal Information
Supply Voltage (V
S
+ to V
S
-) . . . . . . . . . . . . . . . . . . . . . . . . . . . .12V
Supply Voltage Rate-of-rise (dV/dT) . . . . . . . . . . . . . . . . . . . . 1V/µs
Input Voltage (IN+, IN- to V
S
+, V
S
-). . . . . . V
S
- - 0.3V to V
S
+ + 0.3V
Differential Input Voltage (IN+ to IN-) . . . . . . . . . . . . . . . . . . . . ±4.8V
Maximum Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . ±60mA
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +135°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
Electrical Specifications V
S
+ = +5V, V
S
- = -5V, T
A
= +25°C, V
IN
= 0V, R
L
= 500Ω, R
F
= 0, R
G
= OPEN, C
L
= 2.7pF, Unless Otherwise
Specified.
PARAMETER DESCRIPTION CONDITIONS MIN TYP MAX UNIT
AC PERFORMANCE
BW -3dB Bandwidth A
V
= 1, C
L
= 2.7pF 550 MHz
A
V
= 2, R
F
= 806, C
L
= 2.7pF 190 MHz
A
V
= 10, R
F
= 806, C
L
= 2.7pF 20 MHz
BW ± 0.1dB Bandwidth A
V
= 1, C
L
= 2.7pF 60 MHz
SR Slew Rate
V
OUT
= 3V
P-P
, 20% to 80%, R
L
= 100Ω 600 V/µs
V
OUT
= 3V
P-P
, 20% to 80%, R
L
= 500Ω 900 V/µs
t
STL
Settling Time to 0.1% V
OUT
= 2V
P-P
10 ns
t
OVR
Output Overdrive Recovery Time 20 ns
GBWP Gain Bandwidth Product 200 MHz
V
REF
BW (-3dB) V
REF
-3dB Bandwidth A
V
= 1, C
L
= 2.7pF 450 MHz
V
REF
SR V
REF
Slew Rate V
OUT
= 2V
P-P
, 20% to 80% 1000 V/µs
V
N
Input Voltage Noise At f = 10kHz 21 nV/√Hz
I
N
Input Current Noise At f = 10kHz 2.7 pA/√Hz
HD2 Second Harmonic Distortion V
OUT
= 1V
P-P
, 5MHz -70 dBc
HD2 Second Harmonic Distortion V
OUT
= 1V
P-P
, 5MHz -66 dBc
HD3 Third Harmonic Distortion V
OUT
= 1V
P-P
, 5MHz -94 dBc
HD3 Third Harmonic Distortion V
OUT
= 1V
P-P
, 5MHz -84 dBc
dG Differential Gain at 3.58MHz R
L
= 150Ω , A
V
= 2 0.1 %
dθ Differential Phase at 3.58MHz R
L
= 150Ω , A
V
= 2 0.1 °
e
S
Channel Separation (EL5375) At f = 100kHz 90 dB
INPUT CHARACTERISTICS
V
OS
Input Referred Offset Voltage EL5175 -3 ±40 mV
EL5375 -3 ±30 mV
I
IN
Input Bias Current (V
IN
, V
INB
, V
REF
) -25 -12.5 -6 µA
R
IN
Differential Input Resistance 150 kΩ
C
IN
Differential Input Capacitance 1 pF
DMIR Differential Mode Input Range ±2.1 ±2.3 ±2.5 V
CMIR Common Mode Input Range at V
IN
+, V
IN
- -4.3 +3.3 V
EL5175, EL5375
3
FN7306.7
August 25, 2010
V
REFIN
+ Reference Input - Positive V
IN
+ = V
IN
- = 0V 3.3 3.5 V
V
REFIN
- Reference Input - Negative V
IN
+ = V
IN
- = 0V -3.9 -3.6 V
CMRR Input Common Mode Rejection Ratio V
IN
= ±2.5V 75 95 dB
Gain Gain Accuracy EL5175, V
IN
= 1V 0.979 0.994 1.009 V
EL5375, V
IN
= 1V 0.977 0.992 1.007 V
OUTPUT CHARACTERISTICS
V
OUT
Positive Output Voltage Swing R
L
= 500Ω to GND 3.3 3.54 V
Negative Output Voltage Swing R
L
= 500Ω to GND -3.95 -3.6 V
I
OUT
(Max) Maximum Output Current R
L
= 10Ω ±40 ±67 mA
R
OUT
Output Impedance 130 mΩ
SUPPLY
V
SUPPLY
Supply Operating Range V
S
+ to V
S
-4.7511V
I
S (ON)
Power Supply Current Per Channel -
Enabled
89.611mA
I
S (OFF)
+ Positive Power Supply Current - Disabled EN pin tied to 4.8V, EL5175 80 100 µA
EN
pin tied to 4.8V, EL5375 1.7 5 µA
I
S (OFF)
- Negative Power Supply Current - Disabled -150 -120 -90 µA
PSRR Power Supply Rejection Ratio V
S
from ±4.5V to ±5.5V 45 56 dB
ENABLE
t
EN
Enable Time 80 ns
t
DS
Disable Time 1.2 µs
V
IH
EN Pin Voltage for Power-up V
S
+ - 1.5 V
V
IL
EN Pin Voltage for Shutdown V
S
+ - 0.5 V
I
IH-EN
EN Pin Input Current High Per Channel At V
EN
= 5V 40 60 µA
I
IL-EN
EN Pin Input Current Low Per Channel At V
EN
= 0V -10 -3 µA
Electrical Specifications V
S
+ = +5V, V
S
- = -5V, T
A
= +25°C, V
IN
= 0V, R
L
= 500Ω, R
F
= 0, R
G
= OPEN, C
L
= 2.7pF, Unless Otherwise
Specified. (Continued)
PARAMETER DESCRIPTION CONDITIONS MIN TYP MAX UNIT
EL5175, EL5375
P1-P3P4-P6P7-P9P10-P12P13-P15

EL5175ISZ-T13

Mfr. #:
Buy EL5175ISZ-T13
Manufacturer:
Renesas / Intersil
Description:
Differential Amplifiers EL5175ISZ 500MHZCVR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet