Philips Semiconductors
P89LPC901/902/903
8-bit microcontrollers with two-clock 80C51 core
Product data Rev. 05 — 17 December 2004 43 of 53
9397 750 14465
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
9. Limiting values
[1] The following applies to Limiting values:
a) Stresses above those listed under Ta ble 12 may cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any conditions other than those described in Table 13 “DC electrical characteristics”, Table14“AC
characteristics” and Table 15 “AC characteristics (P89LPC901)” of this specification are not implied.
b) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
c) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless
otherwise noted.
Table 12: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit
T
amb(bias)
operating bias ambient temperature −55 +125 °C
T
stg
storage temperature range −65 +150 °C
V
xtal
voltage on XTAL1, XTAL2 pin to V
SS
,
as applicable
-V
DD
+ 0.5 V
V
n
voltage on any other pin to V
SS
−0.5 +5.5 V
I
OH(I/O)
HIGH-level output current per I/O pin - 8 mA
I
OL(I/O)
LOW-level output current per I/O pin - 20 mA
I
I/O(tot)(max)
maximum total I/O current - 120 mA
P
tot(pack)
total power dissipation per package based on package heat
transfer, not device power
consumption
- 1.5 W