XC95144 In-System Programmable CPLD
DS067 (v5.7) May 28, 2009 www.xilinx.com
Product Specification 10
R
Additional Information
XC9500 data sheets and application notes. Packages
Revision History
The following table shows the revision history for this document.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE
TERMS AND CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT
h
ttp://www.xilinx.com/warranty.htm. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN
AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE SPECIFICATIONS STATED IN THE XILINX DATA
SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS ARE NOT DESIGNED OR
INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS
LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES THE
POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT
TO APPLICABLE LAWS AND REGULATIONS.
XC95144-15PQ160I 15 ns PQ160 160-pin Plastic Quad Flat Pack (PQFP) I
XC95144-15PQG160I 15 ns PQG160 160-pin Plastic Quad Flat Pack (PQFP); Pb-Free I
Notes:
1. C = Commercial: T
A
= 0° to +70°C; I = Industrial: T
A
= –40° to +85°C
Device Ordering and
Part Marking Number
Speed
(pin-to-pin
delay)
Pkg.
Symbol
No. of
Pins Package Type
Operating
Range
(1)
Date Version Revision
12/04/98 4.0 Update AC characteristics and internal parameters.
06/18/03 5.0 Updated format.
08/21/03 5.1 Updated Package Device Marking Pin 1 orientation.
11/06/03 5.2 Update pin count on PQ160 packages.
02/16/04 5.3 Correct GTS pin information by removing rows on GTS3 GTS4 from table on page 8. Add
links to additional information.
04/15/05 5.4 Added asynchronous preset/reset pulse width specification (T
APRPW
).
01/03/06 5.5 Added GTS3 and GTS4 pins to table on page 8.
04/03/06 5.6 Added Warranty Disclaimer. Added Pb-Free package ordering information.
05/28/09 5.7 Removed table note reference from Function Block 2, Macrocell 3 in XC95144 I/O Pins.
