LPC2420_60 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 6.2 — 16 October 2013 15 of 87
NXP Semiconductors
LPC2420/2460
Flashless 16-bit/32-bit microcontroller
P1[18]/
USB_UP_LED1/
PWM1[1]/
CAP1[0]
66
[1]
P7
[1]
I/O P1[18] — General purpose digital input/output pin.
O USB_UP_LED1 — USB port 1 GoodLink LED indicator. It is LOW
when device is configured (non-control endpoints enabled), or when
host is enabled and has detected a device on the bus. It is HIGH
when the device is not configured, or when host is enabled and has
not detected a device on the bus, or during global suspend. It
transitions between LOW and HIGH (flashes) when host is enabled
and detects activity on the bus.
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
I CAP1[0] — Capture input for Timer 1, channel 0.
P1[19]/
USB_TX_E1
/
USB_PPWR1/
CAP1[1]
68
[1]
U6
[1]
I/O P1[19] — General purpose digital input/output pin.
O USB_TX_E1
— Transmit Enable signal for USB port 1 (OTG
transceiver).
O USB_PPWR1
— Port Power enable signal for USB port 1.
I CAP1[1] — Capture input for Timer 1, channel 1.
P1[20]/
USB_TX_DP1/
PWM1[2]/SCK0
70
[1]
U7
[1]
I/O P1[20] — General purpose digital input/output pin.
O USB_TX_DP1 — D+ transmit data for USB port 1 (OTG transceiver).
O PWM1[2] — Pulse Width Modulator 1, channel 2 output.
I/O SCK0 — Serial clock for SSP0.
P1[21]/
USB_TX_DM1/
PWM1[3]/SSEL0
72
[1]
R8
[1]
I/O P1[21] — General purpose digital input/output pin.
O USB_TX_DM1 — D transmit data for USB port 1 (OTG transceiver).
O PWM1[3] — Pulse Width Modulator 1, channel 3 output.
I/O SSEL0 — Slave Select for SSP0.
P1[22]/
USB_RCV1/
USB_PWRD1/
MAT1[0]
74
[1]
U8
[1]
I/O P1[22] — General purpose digital input/output pin.
I USB_RCV1 — Differential receive data for USB port 1 (OTG
transceiver).
I USB_PWRD1 — Power Status for USB port 1 (host power switch).
O MAT1[0] — Match output for Timer 1, channel 0.
P1[23]/
USB_RX_DP1/
PWM1[4]/MISO0
76
[1]
P9
[1]
I/O P1[23] — General purpose digital input/output pin.
I USB_RX_DP1 — D+ receive data for USB port 1 (OTG transceiver).
O PWM1[4] — Pulse Width Modulator 1, channel 4 output.
I/O MISO0 — Master In Slave Out for SSP0.
P1[24]/
USB_RX_DM1/
PWM1[5]/MOSI0
78
[1]
T9
[1]
I/O P1[24] — General purpose digital input/output pin.
I USB_RX_DM1 — D receive data for USB port 1 (OTG transceiver).
O PWM1[5] — Pulse Width Modulator 1, channel 5 output.
I/O MOSI0 — Master Out Slave in for SSP0.
P1[25]/
USB_LS1
/
USB_HSTEN1/
MAT1[1]
80
[1]
T10
[1]
I/O P1[25] — General purpose digital input/output pin.
O USB_LS1
— Low-speed status for USB port 1 (OTG transceiver).
O USB_HSTEN1
— Host Enabled status for USB port 1.
O MAT1[1] — Match output for Timer 1, channel 1.
Table 4. Pin description
…continued
Symbol Pin Ball Type Description