5
FN9160.4
May 5, 2008
Absolute Maximum Ratings Thermal Information
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (V
BOOT-GND
). . . . . . . . . . . . . . . . . . . . . . . . . . . .36V
Input Voltage (V
PWM
) . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to 7V
UGATE. . . . . . . . . . . . . . . . . . . V
PHASE
- 0.3V
DC
to V
BOOT
+ 0.3V
V
PHASE
- 3.5V (<100ns Pulse Width, 2µJ) to V
BOOT
+ 0.3V
LGATE . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V
DC
to V
PVCC
+ 0.3V
GND - 5V (<100ns Pulse Width, 2µJ) to V
PVCC
+ 0.3V
PHASE. . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V
DC
to 15V
DC
GND - 8V (<400ns, 20µJ) to 30V (<200ns, V
BOOT-GND
<36V)
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . Class I JEDEC STD
Thermal Resistance (Typical) θ
JA
(°C/W) θ
JC
(°C/W)
SOIC Package (Note 1) . . . . . . . . . . . . 90 N/A
QFN Package (Notes 2, 3). . . . . . . . . . 48 8.5
Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C
Maximum Storage Temperature Range. . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Temperature Range. . . . . . . . . . . . . . . . . . .-40°C to +85°C
Maximum Operating Junction Temperature. . . . . . . . . . . . . +125°C
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12V ±10%
Supply Voltage Range, PVCC . . . . . . . . . . . . . . . . 5V to 12V ±10%
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θ
JA
is measured with the component mounted on a high effective thermal conductivity test board in free air.
2. θ
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
3. For θ
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted.
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
VCC SUPPLY CURRENT
Bias Supply Current I
VCC
f
PWM
= 300kHz, V
PVCC
= 12V - 7.1 - mA
Gate Drive Bias Current I
PVCC
f
PWM
= 300kHz, V
PVCC
= 12V - 9.7 - mA
POWER-ON RESET AND ENABLE
VCC Rising Threshold 0°C to +85°C 9.35 9.80 10.05 V
-40°C to +85°C 8.35 - 10.05 V
VCC Falling Threshold 0°C to +85°C 7.35 7.60 8.00 V
-40°C to +85°C 6.35 - 8.00 V
PWM INPUT (See “TIMING DIAGRAM” on page 8)
Input Current I
PWM
V
PWM
= 5V - 500 - µA
V
PWM
= 0V - -460 - µA
PWM Rising Threshold V
CC
= 12V - 3.00 - V
PWM Falling Threshold V
CC
= 12V - 2.00 - V
Typical Three-State Shutdown Window V
CC
= 12V 1.80 - 2.40 V
Three-State Lower Gate Falling Threshold V
CC
= 12V - 1.50 - V
Three-State Lower Gate Rising Threshold V
CC
= 12V - 1.00 - V
Three-State Upper Gate Rising Threshold V
CC
= 12V - 3.20 - V
Three-State Upper Gate Falling Threshold V
CC
= 12V - 2.60 - V
Shutdown Hold-off Time t
TSSHD
- 245 - ns
UGATE Rise Time t
RU
V
PVCC
= 12V, 3nF Load, 10% to 90% - 26 - ns
LGATE Rise Time t
RL
V
PVCC
= 12V, 3nF Load, 10% to 90% - 18 - ns
UGATE Fall Time t
FU
V
PVCC
= 12V, 3nF Load, 90% to 10% - 18 - ns
ISL6614A
