4
Absolute Maximum Ratings (Note 1) Thermal Information
Supply Voltage V
IN
, PV
CC
, V
IN
_LDO. . . . . . . . GND -0.3V to +5.0V
ESD Classification
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBDV
Operating Conditions
Temperature Range
ISL6413I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40
o
C to 85
o
C
Thermal Resistance θ
JA
(
o
C/W) θ
JC
(
o
C/W)
QFN Package (Notes 1, 2). . . . . . . . . . 40 5
Maximum Junction Temperature (Plastic Package) -55
o
C to 150
o
C
Maximum Storage Temperature Range . . . . . . . . . . -65
o
C to 150
o
C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300
o
C
(Lead Tips Only)
Operating Temperature Range
ISL6413IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40
o
C to 85
o
C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379 for details.
2. For θ
JC
, the “case temp” location is the center of the exposed metal pad on the package underside. See Tech Brief TB379 for details.
Electrical Specifications Recommended operating conditions unless otherwise noted. V
IN
= V
IN
_LDO = PV
CC
= 3.3V, Compensation
Capacitors = 33nF for LDO1 and LDO2. T
A
= 25
o
C. (Note 2)
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS
V
CC
SUPPLY
Supply Voltage Range V
IN
, PV
CC
, V
IN
_LDO 3.0 3.3 3.6 V
Input UVLO Threshold V
TR
2.55 2.62 2.66 V
V
TF
2.5 2.55 2.59 V
Operating Supply Current (Note 3) Device active, but not switching - 0.9 1.1 mA
V
IN
= V
IN
_LDO = PV
CC
= 3.3V
f
SW
= 750kHz, C
OUT
= 10µF, I
L
= 0mA
-1.92.5mA
Shutdown Supply Current EN_PWM = EN_LDO = GND, T
A
= 25
o
C - 15 20 µA
EN_PWM = EN_LDO = GND, T
A
= 85
o
C - 20 25 µA
Input Bias Current EN_PWM = EN_LDO = GND/V
IN
, T
A
= 25
o
C-1.01.5µA
EN_PWM = EN_LDO = GND/V
IN
, T
A
= 85
o
C-1.52.0µA
Thermal Shutdown Temperature (Note 6) Rising Threshold - 150 -
o
C
Thermal Shutdown Hysteresis (Note 6) - 20 25
o
C
SYNCHRONOUS BUCK PWM REGULATOR
Output Voltage -1.8- V
Output Voltage Accuracy I
OUT
= 3mA to 400mA, T
A
= -40
o
C to 85
o
C -2.0 - 2.0 %
Line Regulation I
O
= 10mA, V
IN
= V
IN
_LDO = PV
CC
= 3.0V to 3.6V -0.5 - 0.5 %
Maximum Output Current 400 - - mA
Peak Output Current Limit 600 - 900 mA
PMOS r
DS(ON)
I
OUT
= 200mA - 300 - mΩ
NMOS r
DS(ON)
I
OUT
= 200mA - 225 - mΩ
Efficiency I
OUT
= 200mA, V
IN
= 3.3V - 93 - %
Soft-Start Time 4096 Clock Cycles @ 750kHz - 5.5 - ms
OSCILLATOR
Oscillator Frequency T
A
= -40
o
C to +85
o
C 620 750 860 kHz
Frequency Synchronization Range (f
SYNC
) Clock signal on SYNC pin 500 - 1000 kHz
SYNC High Level Input Voltage 2.3 - - V
SYNC Low Level Input Voltage --1.0V
ISL6413