March 2008 Rev 3 1/19
19
L6374
Industrial quad line driver
Features
Four independent line drivers with 100 mA up
to 35 V outputs
Input signals between - 7 V and + 35 V, with
pre-setting threshold
Push-pull outputs with three state control and
true zero current between Vs and ground
Current limiting on each output effective in the
full "ground to Vs" output voltage range
Output voltage clamp to Vs and to ground
Overtemperature and undervoltage protections
Diagnostic for overtemperature, undervoltage
and overcurrent
Pre-setting delay for overcurrent diagnostic
High speed operation: up to 300 kHz with 35 V
swing
Description
The L6374 is especially designed to be used as a
line driver in industrial control systems based on
the 24 V signal levels (IEC 61131, 24VDC).
Table 1. Device summary
Order codes Package Packaging
L6374FP SO-20 Tube
L6374FPT SO-20 Tape and reel
SO-20
Figure 1. Block diagram
www.st.com
Contents L6374
2/19
Contents
1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 RthJP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 RthJA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3 RthJA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Overtemperature protection (OVT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Undervoltage protection (UV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7 Diagnostic logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8 Programmable delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9 Analog inputs (I1,I2,I3,I4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10 State / push-pull input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11 The switching of the output stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 Application note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
L6374 Maximum ratings
3/19
1 Maximum ratings
2 Pin connections
Figure 2. Pins connection (top view)
Table 2. Absolute maximum ratings
Symbol Pin Parameter Value Unit
V
S
1
Supply voltage (t
W
10 ms) 50 V
Supply voltage (DC) 40 V
V
ilog
12,
13
Logic input voltage (DC) -0.3 to 7 V
I
ilog
Logic input forced current, per pin ±1mA
I
i
7, 8,
9, 10
Channel input current (forced) ±2mA
V
i
Channel input voltage - 7 to 35 V
I
out
3, 4,
17,
18
Output current (forced, apart from inductive load) ±100 mA
Output current (forced, apart from inductive load)
same t
W
10 ms
±1A
V
out
Output Voltage (forced, not resulting from an
inductive kick)
-0.3 to V
S
+0.3 V
I
set
11
Setting pin forced current ±1mA
V
set
Setting pin forced voltage -0.3 to 5 V
V
diag
14
External voltage -0.3 to 35 V
I
diag
Externally forced current -10 to 10 mA
V
C3
13 Voltage on the delay capacitor, externally forced -0.3 to 4.5 V
T
op
Ambient temperature, operating range -25 to 85 °C
T
J
Junction temperature, operating range (see
overtemperature protection)
-25 to 125 °C
T
stg
Storage temperature -55 to 150 °C

L6374FP013TR

Mfr. #:
Manufacturer:
STMicroelectronics
Description:
Buffers & Line Drivers Industrial Quad Line
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet