OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

WS2512-BLK

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20
Agilent WS2512
4 x 4 Power Amplifier Module
for UMTS2100 (1920 – 1980 MHz)
Data Sheet
Description
The WS2512, a Wide-band Code
Division Multiple Access
(WCDMA) Power Amplifier (PA),
is a fully matched 10-pin surface
mount module developed for
WCDMA handset applications.
This power amplifier module
operates in the 1920 – 1980 MHz
bandwidth. The WS2512 meets
the stringent WCDMA linearity
requirements for output power of
up to 28 dBm. A low current
(Vcont) pin is provided for high
efficiency improvement of the
low output power range.
Features
• CoolPAM circuit technology
• Good linearity
• High efficiency
• 10-pin surface mounting package
(4 mm x 4 mm x 1.4 mm)
• Low power-state control
•
Low quiescent current
• Internal 50Ω matching networks
for both RF input and output
Applications
• W-CDMA handsets
• HSDPA handsets
Functional Block Diagram
The WS2512 features CoolPAM
Circuit technology offering state-
of-the-art reliability, temperature
stability and ruggedness.
The WS2512 is self contained,
incorporating 50ohm input and
output matching networks.
Input
Match
Inter
Stage
Match
Output
Match
Bias Circuit & Control Logic
DA PA
Vcc2(10)
Vref
(
5
)
Vcont
(
4
)
RF Input (2)
Vcc1 (1)
RF Output (8)
MMIC
MODULE
2
Table 1. Absolute Maximum Ratings
[1]
Parameter Symbol Min. Typical Max. Unit
RF Input Power P
in
– – 10.0 dBm
DC Supply Voltage V
cc
– 3.4 5.0 V
DC Reference Voltage V
ref
– 2.85 3.3 V
Storage Temperature T
stg
-55 – +125 °C
Table 2. Recommended Operating Conditions
Parameter Symbol Min. Typical Max. Unit
DC Supply Voltage
– Mid/High Power Mode V
cc
3.2 3.4 4.2 V
– Low Power Mode 1.5 V
DC Reference Voltage V
ref
2.75 2.85 2.95 V
Mode Control Voltage
– High Power Mode V
cont
– 0 – V
– Low/Mid Power Mode V
cont
– 2.85 – V
Operating Frequency Fo 1920 1980 MHz
Ambient Temperature Ta -20 25 90 °C
Table 3. Power Range Truth Table
Power Mode Symbol Vref Vcont
[2]
Vcc Range
High Power Mode
[3]
PR3 2.85 Low 3.4 ~28 dBm
Mid Power Mode
[3]
PR2 2.85 High 3.4 ~16 dBm
Low Power Mode
[3]
PR1 2.85 High 1.5 ~7 dBm
Shut Down Mode
[4]
– 0.00 – 3.4 –
Notes:
1. No damage assuming only one parameter is set at limit at a time with all other parameters set at
or below nominal value
2.
High (1.5V – 3.0V), Low (0.0V – 0.5V).
3.
To change between High Power Mode and Low Power Mode, switch Vcont accordingly.
4. In order to shut down the module, turn off Vref accordingly.
3
Table 4. Electrical Characteristics for WCDMA Mode (Vref=2.85V, Vcc=3.4V, Temp=+25°C)
[1]
Characteristics Symbol Condition Min. Typ. Max. Unit
Operating Frequency Range F 1920 – 1980 MHz
Gain Gain_hiw
[2]
High Power Mode, Pout=28.0 dBm 23.5 26.5 dB
Gain_hi High Power Mode, Pout=27.0 dBm 23.5 26.5 dB
Gain_mid Mid Power Mode, Pout=16.0 dBm 14.5 17.5 dB
Gain_low Low Power Mode, Pout=7.0 dBm, Vcc=1.5V 10 13.0 dB
Power Added Efficiency PAE_hiw
[2]
High Power Mode, Pout=28.0 dBm 36 40 %
PAE_hi High Power Mode, Pout=27.0 dBm 33 37 %
PAE_mid Mid Power Mode, Pout=16.0 dBm 16.4 21.5 %
PAE_low Low Power Mode, Pout=7.0 dBm, Vcc=1.5V 10.3 14 %
Total Supply Current Icc_hiw
[2]
High Power Mode, Pout=28.0 dBm 465 510 mA
Icc_hi High Power Mode, Pout=27.0 dBm 400 445 mA
Icc_mid Mid Power Mode, Pout=16.0 dBm 54 70 mA
Icc_low Low Power Mode, Pout=7.0 dBm, Vcc=1.5V 22 33 mA
Quiescent Current Iq_hi High Power Mode 45 65 90 mA
Iq_mid Mid Power Mode 7 13 22 mA
Iq_low Low Power Mode, Vcc=1.5V 5 11 18 mA
Reference Current Iref_hi High Power Mode 3.5 7 mA
Iref_mid Mid Power Mode 4 8 mA
Iref_low Low Power Mode, Vcc=1.5V 4 8 mA
Control Current
[3]
Icont_mid Mid Power Mode 0.18 1 mA
Icont_low Low Power Mode, Vcc=1.5V 0.18 1 mA
Total Current in Power-down mode Ipd Vref=0.0V 0.2 5 µA
ACLR in High power mode
[4]
5 MHz offset ACLR1_hiw
[2]
High Power Mode, Pout=28.0 dBm – -42 -37 dBc
10 MHz offset ACLR2_hiw
[2]
High Power Mode, Pout=28.0 dBm – -55 -47 dBc
ACLR in High power mode
[4]
5 MHz offset ACLR1_hi High Power Mode, Pout=27.0 dBm – -40 -37 dBc
10 MHz offset ACLR2_hi High Power Mode, Pout=27.0 dBm – -54 -47 dBc
ACLR in Mid power mode
[4]
5 MHz offset ACLR1_mid Mid Power Mode, Pout=16.0 dBm – -45 -37 dBc
10 MHz offset ACLR2_mid Mid Power Mode, Pout=16.0 dBm – -57 -47 dBc
ACLR in Low power mode
[4]
5 MHz offset ACLR1_low Low Power Mode, Pout=7.0 dBm, Vcc=1.5V – -41 -37 dBc
10 MHz offset ACLR2_low Low Power Mode, Pout=7.0 dBm, Vcc=1.5V – -54 -47 dBc
Harmonic Suppression Second 2f0 High Power Mode, Pout=28.0 dBm – -42 -30 dBc
Third 3f0 High Power Mode, Pout=28.0 dBm – -64 -45 dBc
Input VSWR VSWR – 2:1 2.5:1
Stability (Spurious Output) S VSWR 6:1, All phase ––-60 dBc
Noise Power in Rx Band RxBN High Power Mode, Pout=28.0 dBm – -139 -136 dBm/Hz
Notes:
1. Electrical characteristics are specified under HSDPA modulated Up-Link signal (DPCCH/DPDCH=12/15, HS-DPCCH/DPDCH=15/15)
unless specified otherwise.
2. Specified under WCDMA modulated (3GPP Uplink DPCCH + 1DPDCH) signal.
3. Control current when series 6.2kohm is used.
4. ACP is expressed as a ratio of total adjacent power to signal power, both with 3.84 MHz bandwidth at specified offsets.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20

WS2512-BLK

Mfr. #:
Buy WS2512-BLK
Manufacturer:
Broadcom / Avago
Description:
IC AMP W-CDMA 1.92-1.98GHZ 10SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet