PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
PRODUCT SPECIFICATION FOR
MINI-FIT JR.
SHEET No.
E6
EC No:
UCP2013-2727
5 of 10
DATE:
2013/01/04
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
BBEE JBELL FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
DESCRIPTION
TEST CONDITION REQUIREMENT
4
Vibration
(Random)
Mate connectors and vibrate per EIA
364-28, test condition VII.
10 milliohms MAXIMUM
(change from initial)
and
Discontinuity < 1 microsecond
5
Shock
(Mechanical)
Mate connectors and shock at 50 g's
with ½ sine wave (11 milliseconds)
shocks in the ±X, ±Y, ±Z axes, (18
shocks total).
20 milliohms MAXIMUM
(change from initial)
and
Discontinuity < 1 microsecond
6
Wire
Pullout Force
(Axial)
Apply an axial pullout force on the wire
at a rate of 25 ± 6 mm (1 ± ¼ inch).
16 Awg = 88.0 N (19.8 lbf) Min.
18 Awg = 88.0 N (19.8 lbf) Min.
20 Awg = 59.0 N (13.3 lbf) Min.
22 Awg = 39.0 N (8.78 lbf) Min.
24 Awg = 29.0 N (6.52 lbf) Min.
26 Awg = 19.0 N (4.27 lbf) Min.
28 Awg = 9.80 N (2.20 lbf) Min.
7
Crimp Terminal
Insertion Force
(into Housing)
Apply an axial insertion force on the
terminal at a rate of 25 ± 6 mm (1 ± ¼
inch).
15.0 N (3.37 lbf)
MAXIMUM insertion force
8
Normal
Force
Apply a perpendicular force.
Sn
1.47 N (150 grams)
MINIMUM
Au
0.49 N (50 grams)
MINIMUM
9
Panel Insertion and
Withdrawl Forces
Insert and withdraw a connector at a
rate of 25 ± 6 mm (1 ± ¼ inch) per
minute. (Applies only to plugs with
panel retention feature)
225 N (50.7 lbf)
MAXIMUM insertion force
and
157 N (35.3 lbf) MINIMUM
withdrawl force
10
Thumblatch
Operation Force
Depress latch at a speed rate of 25 ± 6
mm (1 ± ¼ inch) per minute.
16.67 N (3.75 lbf) MAXIMUM
11
Thumblatch Yield
Strength
Mate loaded connectors fully. Pull
connectors apart at a speed rate of 25 ±
6 mm (1 ± ¼ inch) per minute.
68 N (15.3 lbf) MINIMUM
