©2011 Silicon Storage Technology, Inc. DS75033A 10/11
5
2.4 GHz High-Power, High-Gain Power Amplifier
SST12LP07
Data Sheet
Microchip Technology Company
Electrical Specifications
The AC and DC specifications for the power amplifier interface signals. Refer to Table 3 for the DC voltage and
current specifications. Refer to Figures 3 through 11 for the RF performance.
Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute
Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these conditions or conditions greater than those defined in the
operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating con-
ditions may affect device reliability.)
Input power to pin 2 (P
IN
)..................................................... +5dBm
Average output power (P
OUT
)
1
................................................ +26dBm
1. Never measure with CW source. Pulsed single-tone source with <50% duty cycle is recommended. Exceeding the max-
imum rating of average output power could cause permanent damage to the device.
Supply Voltage at pins 13, 14, and 16 (V
CC
).................................-0.3V to +4.0V
Reference voltage to pin 4 (V
REF
).........................................-0.3V to +3.3V
DC supply current (I
CC
)...................................................... 400mA
Operating Temperature (T
A
) ............................................ -40ºC to +85ºC
Storage Temperature (T
STG
)........................................... -40ºC to +120ºC
Maximum Junction Temperature (T
J
) ........................................... +150ºC
Surface Mount Solder Reflow Temperature ........................... 260°C for 10 seconds
Table 2: Operating Range
Range Ambient Temp V
DD
Industrial -40°C to +85°C 3.3V
T2.1 75033
Table 3: DC Electrical Characteristics
Symbol Parameter Min. Typ Max. Unit Test Conditions
V
CC
Supply Voltage at pins 13, 14, 16 3.0 3.3 3.6 V
I
CC
Supply Current
for 802.11g, 22 dBm 220 mA
for 802.11b, 22 dBm 230 mA
I
CQ
Idle current for 802.11g to meet EVM <2.5% @ 19
dBm
70 mA
I
OFF
Shut down current 0.1 µA
V
REG
Reference Voltage for, with 110 resistor 2.7
5
2.8
5
2.95 V
T3.0 75033