9FGV1001 Datasheet
13©2018 Integrated Device Technology, Inc. July 5, 2018
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc. All rights reserved.
Tech Support
www.IDT.com/go/support
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
Package Outline Drawings
The package outline drawings are appended at the end of this document and are accessible from the link below. The package information
is the most current data available.
www.idt.com/document/psc/24-vfqfpn-package-outline-drawing-40-x-40-x-075-mm-body-05mm-pitch-epad-26-x-26-mm-nbnbg24p2
Marking Diagram
Ordering Information
“G” indicates RoHS 6.6 compliance.
“nnn” are decimal digits indicating a specific configuration.
Revision History
Orderable Part Number Package Carrier Type Temperature
9FGV1001BnnnNBGI 4 × 4 mm, 0.5mm pitch 24-VFQFPN Tray -40 to +85°C
9FGV1001BnnnNBGI8 4 × 4 mm, 0.5mm pitch 24-VFQFPN Reel -40 to +85°C
Revision Date Description of Change
July 5, 2018 Removed “120kOhm” text from pin assignment notes.
March 28, 2018 Updated pin 23 descriptions and Output Features on front page.
February 6, 2018 Updated pin 23 descriptions.
January 31, 2018
▪ Updated drive level parameter in Crystal Characteristics table.
▪ Updated Package Outline Drawings text and added hyperlink to document.
October 5, 2017 Initial release.
1. Line 1 and 2: truncated part number
2. “#” denotes stepping number.
3. “YWW” denotes the last digits of the year and week the part was assembled.
4. “**” denotes lot number.
5. “$” denotes mark code.
