14
Applications Support Materials
Contact your local Avago Technologies Component Field
Sales O ce for information on how to obtain PCB layouts,
test boards and demo boards for the 1x9 transceivers.
Evaluation Kits
Avsgo Technologies has available three evaluation kits
for the 1x9 transceivers. The purpose of these kits is to
provide the neces sary materials to evaluate the perfor-
mance of the AFBR-510XZ family in a pre-existing 1x13 or
2x11 pinout system design con guration or when con-
nec tored to various test equipment.
1. HFBR-0319 Evaluation Test Fixture Board
This test xture converts +5 V ECL 1x9 transceivers to –5 V
ECL BNC coax connections so that direct connections to
industry standard ber optic test equipment can be ac-
complished.
Figure 11. Relative Input Optical Power vs. Eye Sampling Time Position.
Accessory Duplex SC Con nectored Cable Assemblies
Avago Technologies recommends for optimal coupling
the use of exible-body duplex SC con nec tored cable.
Accessory Duplex ST Connectored Cable Assemblies
Avago Technologies recommends the use of Duplex
Push-Pull connectored cable for the most repeatable
optical power coupling performance.
RELATIVE INPUT OPTICAL POWER (dB)
-4 4
0
EYE SAMPLING TIME POSITION (ns)
-3 -1 0 1
5
4
3
2
3
1
-2 2
2.5 x 10
-10
BER
1.0 x 10
-12
BER
CONDITIONS:
1.T
A
= 25˚ C
2. V
CC
= 5 Vdc
3. INPUT OPTICAL RISE/FALL TIMES = 1.0/2.1 ns.
4. INPUT OPTICAL POWER IS NORMALIZED TO
CENTER OF DATA SYMBOL.
5. NOTE 20 AND 21 APPLY.
AFBR-5103Z SERIES
