PC4D10SNIP0F Series
1
Sheet No.: D2-A09201EN
Date Sep. 1. 2006
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
PC4D10SNIP0F
Series
High Speed 10Mb/s, High CMR
Mini-fl at 2-channel Package
∗
OPIC Photocoupler
■
Description
PC4D10SNIP0F Series
contains a LED optically cou-
pled to an OPIC.
It is packaged in a 8 pin mini-fl at (2-ch output).
Input-output isolation voltage(rms) is 3.75 kV.
High speed response (TYP. 10Mb/s) and CMR is
MIN. 10kV/
μ
s.
■
Features
1. 2-ch output, 8 pin Mini-fl at package
2. Double transfer mold package
(Ideal for Flow Soldering)
3.
High noise immunity due to high instantaneous com-
mon mode rejection voltage (CM
H
: MIN. 10kV/
μ
s, CM
L
: MIN.
−
10kV/
μ
s
)
4. High speed response
(t
PHL
: TYP. 50ns, t
PLH
: TYP. 48ns)
5. Isolation voltage between input and output (V
iso(rms)
:
3.75kV)
6. Lead-free and RoHS driective compliant
■
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
fi le No. E64380 (as model No.
PC4D10S
)
2. Approved by VDE, DIN EN60747-5-2
(
∗
)
(as an op-
tion), fi le No. 40009162 (as model No.
PC4D10S
)
3. Package resin : UL fl ammability grade (94V-0))
(∗)
DIN EN60747-5-2 : successor standard of DIN VDE0884.
■
Applications
1. Programmable controller
2. Inverter
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-pro-
cessing circuit integrated onto a single chip.
