Part No.
1
Output
Type
Output
Polarity
(high
field)
IDD (typ.
@ 3.3 V)
BOP, BRP
2
Sleep/Idle
Time
Temp Com-
pensation
Tamper
Threshold
(typ.)
Digital Fil-
tering
VDD
Si7206-
B-00-IV(R)
Latch Low (open
drain)
950 µA
BOP(max) =
+1.4 mT
BOP(min) =
+0.6 mT
BRP(min) =
-1.4 mT
BRP(max) =
-0.6 mT
|BOP - BRP| =
2.0 mT (typ)
1 msec
(idle)
None None None 3.3 - 26.5
V
Note:
1. B is the die revision. The next two digits are used with this look up table to give more specific information. I or F is the tempera-
ture range -40 to +125°C or 0 to 70°C. E is the temperature range (-40 to +150°C). B, M, or V is the package type (TO92, DFN8,
or SOT23) the optional (R) is the designator for tape and reel (3000 pcs per reel). Parts not ordered by the full reel will be sup-
plied in cut tape.
2. Specified at 25°C for parts with temperature compensation. Scale is 20 mT if Bop/Brp and Tamper threshold support this, other-
wise it is 200 mT.
3. North pole of a magnet at the bottom of a SOT23 package is defined as positive field.
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
silabs.com | Building a more connected world. Rev. 0.92 | 16
