7.2 SOT23 5-Pin PCB Land Pattern
Dimension (mm)
C 2.70
E 0.95
X 1.05
Y 0.60
Note:
General
1. 1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing is per the ANSI Y14.5M-1994 specification.
3. This Land Pattern Design is based on the IPC-7351 guidelines.
4. All dimensions shown are at Maximum Material Condition (MMC). Least Material Condition (LMC) is calculated based on a Fabri-
cation Allowance of 0.05 mm.
Card Assembly
1. A No-Clean, Type-3 solder paste is recommended.
2. The recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for Small Body Components.
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Land Patterns
silabs.com | Building a more connected world. Rev. 0.92 | 22
