GP2AP002S00F

GP2AP002S00F
10
Sheet No.: OP13009EN
Precautions for Soldering
1. In case of solder reflow
Reflow is allowed only twice at the temperature and the time
within the temperature profile as shown in the figure below.
Reflow interval shall be within 7days under conditions, 10 to 30°C, 70%RH or less.
2. Other precautions
An infrared lamp used to heat up for soldering may cause a localized temperature rise in the resin.
Also avoid immersing the resin part in the soldering.
Even if within the temperature profile above, there is the possibility that the gold wire in package is broken
in case that the deformation of PCB gives the affection to lead pins.
Please use after confirmation the conditions fully actual solder reflow machine.
25°C
MAX
MAX120s
1~5°C/s
220°C
MAX50s
260°C
MAX10s
190°C
1~5°C/s
1~5°C/s
150°C
GP2AP002S00F
11
Sheet No.: OP13009EN
Packing
2,000pcs products
Inner Packing
Packing
Caver tape
Carrier tape
EIAJ C-3 Label
Taping reel containing products
Silica gel
Aluminium laminated sack
Humidity indicator
Aluminium laminated sack
containing a taping reel
Aluminium laminated bag with tape-reel (5 bags)
Cushioning material
Packing case
Kraft tape
Outer Packaging
Outer packing material: Packing case(Corrugated cardboard), Cushioning material (Urethane)
Humidity indicator card (paper), Label(paper), silica gel, craft tape
Quantity: 10,000pcs./box
The contents of the carton indication conforms to EIAJ C-3 and the following items are indicated.
Regular packaged mass: Approximately 700g
Aluminium laminated bag (Alumi-Polyethylene)
Model No., Internal production control name, Quantity, Packing date, Corporate name, Country of origin
Outer Packaging drawing
Inner Packaging drawing
Quantity :2,000pcs./Reel
Inner packing material:・Reel(PPE) Carrier tape (PC) Caver tape(PET)
EIAJ C-3 Label
EIAJ C-3 Label
GP2AP002S00F
12
Sheet No.: OP13009EN
Important Notices
· The circuit application examples in this publication are
provided to explain representative applications of SHARP
devices and are not intended to guarantee any circuit
design or license any intellectual property rights. SHARP
takes no responsibility for any problems related to any
intellectual property right of a third party resulting from
the use of SHARP's devices.
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the
specifications, characteristics, data, materials, structure,
and other contents described herein at any time without
notice in order to improve design or reliability.
Manufacturing locations are also subject to change without
notice.
· Observe the following points when using any devices in
this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which does
not meet the conditions and absolute maximum ratings to
be used specified in the relevant specification sheet nor
meet the following conditions:
(i) The devices in this publication are designed for use in
general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in connection
with equipment that requires an extremely high level of
reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
scuba).
· If the SHARP devices listed in this publication fall within
the scope of strategic products described in the Foreign
Exchange and Foreign Trade Law of Japan, it is necessary
to obtain approval to export such SHARP devices.
· This publication is the proprietary product of SHARP and
is copyrighted, with all rights reserved. Under the
copyright laws, no part of this publication may be
reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
Express written permission is also required before any use
of this publication may be made by a third party.
· Contact and consult with a SHARP representative if there
are any questions about the contents of this publication.

GP2AP002S00F

Mfr. #:
Manufacturer:
Sharp Microelectronics
Description:
Proximity Sensors Prox Snsr 3.8V 940nm w/ Amb Light Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet