LOW SKEW, 1-TO-10 DIFFERENTIAL-TO-3.3V, 2.5V LVPECL/ECL
FANOUT BUFFER
16 Rev F 7/8/15
85310I-11 DATA SHEET
Ordering Information
Table 9. Ordering Information
NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
Part/Order Number Marking Package Shipping Packaging Temperature
85310AYI-11LF ICS5310AI11L “Lead-Free” 32 Lead LQFP Tray -40C to 85C
85310AYI-11LFT ICS5310AI11L “Lead-Free” 32 Lead LQFP Tape & Reel -40C to 85C
Rev F 7/8/15 17 LOW SKEW, 1-TO-10 DIFFERENTIAL-TO-3.3V, 2.5V LVPECL/ECL
FANOUT BUFFER
85310I-11 DATA SHEET
Revision History Sheet
Rev Table Page Description of Change Date
B
T5 5 AC Characteristics table - t
PD
row, revised value from 2.25ns Max. to
2.5ns Max.
4/29/02
B 9 Added Termination for LVPECL Outputs. 5/29/02
C
T4D 5 Added LVPECL DC Characteristics table.
Changed part number from ICS85310-11 to 85310I-11 in title and all subsequent areas
throughout the datasheet.
7/25/02
D
T4A 4
7
Power Supply table - increased max. value for I
EE
to 120mA from 30mA max.
Power Considerations have re-adjusted to the increased I
EE
value.
10/23/02
E
T2
T5
T9
1
2
5
6
9
10
15
Features Section - added Additive Phase Jitter bullet and Lead-Free bullet.
Pin Characteristics - changed C
IN
4pF max. to 4pF typical.
AC Characteristics Table - added Additive Phase Jitter spec.
Added Additive Phase Jitter Section.
Added Termination for 2.5V LVPECL Outputs.
Added Differential Clock Input Interface.
Ordering Information Table - added Lead-Free Part Number and Note.
7/7/05
F
T4D 5
11 - 12
LVPECL DC Characteristics Table -corrected V
OH
max. from V
CCO
- 1.0V to
V
CCO
- 0.9V; and V
SWING
max. from 0.85V to 1.0V.
Power Considerations - corrected power dissipation to reflect V
OH
max in Table 4D.
4/11/07
F
T4C
T5
T9
4
5
8
10
16
Differential DC Characteristics Table -updated NOTES.
AC Characteristics Table - added thermal note.
Updated Wiring the Differential Input to Accept Single-ended Levels section.
Updated Figure 4A & 4B.
Ordering Information Table - corrected lead-free marking.
Converted datasheet format.
6/9/10
F
T9 16 Ordering Information - removed leaded devices.
Updated data sheet format.
7/8/15
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in
this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether
express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This
document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or
other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as
those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected
names, logos and designs, are the property of IDT or their respective third party owners.
Copyright ©2015 Integrated Device Technology, Inc.. All rights reserved.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com
Tech Support
email: clocks@idt.com

85310AYI-11LFT

Mfr. #:
Manufacturer:
IDT
Description:
Clock Buffer 10 LVPECL OUT BUFFER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet