DS1870
LDMOS RF Power-Amplifier Bias
Controller
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
28
____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2006 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
is a registered trademark of Dallas Semiconductor Corporation.
SDA and SCL Pullup Resistors
SDA is an open-collector output on the DS1870 that
requires a pullup resistor to realize high logic levels. A
master using either an open-collector output with a
pullup resistor or a push-pull output driver can be used
for SCL. Pullup resistor values should be chosen to
ensure that the rise and fall times listed in the AC elec-
trical characteristics are within specification.
Advanced Application
A circuit showing the implementaion of current sensing
using the DS1870 is shown under
Advanced
Application with Current Sense
.
N.C. N.C.
Advanced Application with Current Sense
Chip Information
TRANSISTOR COUNT: 52,353
SUBSTRATE CONNECTED TO GROUND
Package Information
For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo.
