QUINT-PS/ 1AC/12DC/20
103383_en_02 PHOENIX CONTACT 4
DC OK active
Output description U
OUT
> 0.9 x U
N
: High signal
Voltage + 5 V DC ... 12 V DC
Current ≤ 20 mA (short circuit resistant)
Status display "DC OK" LED green / U
OUT
< 0.9 x U
N
: LED flashing
DC OK floating
Output description Relay contact, U
OUT
> 0.9 x U
N
: Contact closed
Voltage ≤ 30 V AC/DC (≤ 0.5 A / at 60 V AC/DC)
Current ≤ 1 A
Status display "DC OK" LED green / U
OUT
< 0.9 x U
N
: LED flashing
POWER BOOST, active
Output description I
OUT
< I
N
: High signal
Voltage + 5 V DC ... 12 V DC
Current ≤ 20 mA (short circuit resistant)
Status display LED "BOOST", yellow / I
OUT
> I
N
: LED on
General data
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 3.5 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 V DC (routine test)
Degree of protection IP20
Class of protection I, with PE connection
MTBF > 500 000 h in acc. with IEC 61709 (SN 29500)
Housing material Steel sheet, zinc-plated
Dimensions W / H / D (state of delivery) 90 mm / 130 mm / 125 mm
Dimensions W / H / D (90° turned) 122 mm / 130 mm / 93 mm
Weight 1.5 kg
Ambient conditions
Ambient temperature (operation) -25 °C ... 70 °C (> 60°C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) 95 % (at 25°C, no condensation)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm in acc. with IEC 60068-2-6
15 Hz ... 150 Hz, 2.3g, 90 min.
Shock 30g in all directions in acc. with IEC 60068-2-27
Pollution degree in acc. with EN 50178 2
Climatic class 3K3 (in acc. with EN 60721)
Standards
Electrical Equipment for Machinery EN 60204
Safety transformers for power supply units IEC 61558-2-17
Electrical safety (of information technology equipment) IEC 60950/VDE 0805 (SELV)
Electronic equipment for use in electrical power installations EN 50178/VDE 0160 (PELV)
SELV IEC 60950 (SELV) and EN 60204 (PELV)
Safe isolation DIN VDE 0100-410
DIN VDE 0106-1010
Protection against electric shock DIN 57100-410
Protection against electric shock, basic requirements for safe isolation in
electrical equipment
DIN VDE 0106-101