NBA3N200S
www.onsemi.com
16
Figure 17. M−LVDS Receiver Output: VCC (CHANNEL 1), R Pin (CHANNEL 2)
Simplex Theory Configurations: Data flow is
unidirectional and Point−to−Point from one Driver to one
Receiver. NBA3N200S devices provide a high signal
current allowing long drive runs and high noise immunity.
Single terminated interconnects yield high amplitude levels.
Parallel terminated interconnects yield typical MLVDS
amplitude levels and minimizes reflections. See Figures 18
and 19. A NBA3N200S can be used as the driver or as a
receiver.
Figure 18. Point−to−Point Simplex Single
Termination
Figure 19. Parallel−Terminated Simplex
Simplex Multidrop Theory Configurations: Data flow is
unidirectional from one Driver with one or more Receivers
Multiple boards required. Single terminated interconnects
yield high amplitude levels. Parallel terminated
interconnects yield typical MLVDS amplitude levels and
minimizes reflections. On the Evaluation Test Board,
Headers P1, P2, and P3 may be used as need to interconnect
transceivers to a each other or a bus. See Figures 20 and 21.
A NBA3N200S can be used as the driver or as a receiver.
