NCP81246
www.onsemi.com
11
Table 5. ELECTRICAL CHARACTERISTICS − 2-PHASE RAIL SPECIFIC (continued)
(Unless otherwise stated: −40°C<T
A
< 100°C; 4.75 V < VCC < 5.25 V; C
VCC
= 0.1 mF)
Parameter UnitMaxTypMinTest Conditions
Iout OUTPUT
Output Offset Current
V
ILIM
= 5 V − − 0.25
mA
Output Source Current
I
LIM
Source Current = 20 mA
− 200 −
mA
Current Gain
I
IOUT
/ I
ILIM
, R
ILIM
= 20 kW R
IOUT
= 5 kW
DAC = 0.8 V, 1.25 V, 1.52 V
9.5 10 10.5 A/A
MODULATORS
0% Duty Cycle Comp Voltage for PWM Held Low − 1.3 − V
100% Duty Cycle
Comp Voltage for PWM Held High
VRAMP = 12 V
− 2.6 − V
PWM Ramp Duty Cycle Matching Comp = 2 V, PWM T
ON
Matching − ±3 − %
PWM Phase Angle Error − ±15 − °
Ramp Feed Forward Voltage Range 5 − 20 V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Based on design or characterisation data, not in production test.
Table 6. ELECTRICAL CHARACTERISTICS − SINGLE PHASE RAIL SPECIFIC
(Unless otherwise stated: −40°C<T
A
< 100°C; 4.75 V < VCC < 5.25 V; C
VCC
= 0.1 mF)
Parameter Test Conditions Min Typ Max Unit
ERROR AMPLIFIER
Input Bias Current −25 − 25 nA
VSP Input Voltage Range −0.3 − 3 V
VSN Input Voltage Range −0.3 − 0.3 V
gm 1.3 1.6 2.0 mS
Output Offset −15 − 15
mA
Open Loop Gain
ZL = (1 nF +1 kW) || 10 pF
− 73 − dB
Source Current
DV
IN
= −200 mV
− 200 −
mA
Sink Current
DV
IN
= 200 mV
− 200 −
mA
−3dB Bandwidth
ZL = (1 nF +1 kW) || 10 pF
− 20 − MHz
CURRENT SENSE AMPLIFIER
Input Bias Current CSP = CSN = 1.2 V −50 − 50 nA
Common Mode Input Voltage Range CSP = CSN 0 − 2.3 V
Common Mode Rejection CSP = CSN = 0.5 V to 1.2 V 60 80 − dB
Differential Mode Input Voltage
Range
CSN = 1.2 V −100 − 100 mV
Gain I
OUT
Output 0V ≤ CSP−CSN ≤ 0.1 V 0.96 1 1.04 mS
Gain VSP and I
LIM
Outputs 0V ≤ CSP−CSN ≤ 0.1 V 0.96 1 1.04 mS
−3dB Bandwidth − 6 − MHz
OVER-CURRENT PROTECTION
Output Offset Current V
ILIM
= 1.3 V −1.5 − 1.5
mA
Maximum Output Current 0V ≤ V
ILIM
≤ 1.3 V 130 − −
mA
Maximum Output Voltage
I
ILIM
= 100 mA
1.4 − − V
Activation Threshold Voltage 1.28 1.3 1.32 V
Activation Delay − 250 − ns
I
OUT
Output Offset Current 0V ≤ V
IOUT
≤ 2.0 V −250 − 250 nA