4.25 Gbps, 3.3 V Low Noise,
Transimpedance Amplifier
Data Sheet
ADN2882
FEATURES
Bandwidth: 3.5 GHz
Input noise current density: 8 pA/Hz
Optical sensitivity
22.0 dBm
1
20.4 dBm
2
Differential transimpedance: 3700 V/A
Power dissipation: 80 mW
Differential output swing: 260 mV p-p
Input overload current: 5.6 mA p-p
On-chip RSSI function
Low frequency cutoff: 12 kHz
On-chip PD filter: R
F
= 200 Ω, C
F
= 20 pF
Die size: 0.7 mm × 1.2 mm
APPLICATIONS
4.25 Gbps optical receivers
GbE/FC optical receivers
SFF-8472-compliant receivers
PIN/APD-TIA receiver optical subassemblies
GENERAL DESCRIPTION
The ADN2882 is a 3.3 V high gain SiGe transimpedance
amplifier (TIA) which converts the small signal current of a
photo detector to a large differential voltage output. The
ADN2882 features a typical 475 nA input-referred noise,
enabling an optical sensitivity of −22 dBm (0.85 A/W PIN).
With a bandwidth of 3.5 GHz, the ADN2882 allows a data rate
operation up to 4.25 Gbps. Typical power dissipation is 80 mW.
To facilitate the assembly in small form factor packages, such as
TO-46 headers, the ADN2882 provides an on-chip RC filter
(200 Ω, 20 pF) and features a 12 kHz low frequency cutoff
without using an external capacitor. An on-chip RSSI circuit,
which generates a voltage proportional to the average photo-
diode current, is available for power monitoring and assembly
alignment.
The ADN2882 is available in die form. With a chip area of
1.2 mm × 0.7 mm, the TIA layout is optimized for TO-Can-
based packages.
1
Based on 1550 nm PIN, C
D
= 0.5 ± 0.10 pF, responsivity = 0.85 A/W,
ER = 9 dB, PRBS 2
31
− 1 at 4.25 Gbps, BER < 10
−12
.
2
Calculated result based on an 850 nm PIN, C
D
= 0.5 ± 0.15 pF,
responsivity = 0.48 A/W, ER = 9 dB, at 4.25 Gbps, BER < 10
12
.
FUNCTIONAL BLOCK DIAGRAM
1100
0.85V
20pF
50
200 50
3.3V
FILTER
IN
VCCFILTER
VCC
GND GND CAP
5mA
OUTB
OUT
RSSI
04946-001
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©20052014 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
ADN2882* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADN2882 Evaluation Board
DOCUMENTATION
Data Sheet
ADN2882: 4.25 Gbps 3.3V Low Noise Transimpedance
Amplifier Data Sheet
REFERENCE MATERIALS
Informational
Optical and High Speed Networking ICs
SFP Chipset and Reference Design Simplify 4.25 GBPS
Transceivers
DESIGN RESOURCES
ADN2882 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADN2882 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
ADN2882 Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Absolute Maximum Ratings ............................................................ 4
ESD Caution .................................................................................. 4
Pin Layout and Function Descriptions ...........................................5
Typical Performance Characteristics ..............................................6
5-Pin TO-46 Assembly Recommendations ...................................9
4-Pin TO-46 Assembly Recommendations ................................ 11
Outline Dimensions ....................................................................... 12
Die Information .......................................................................... 12
Ordering Guide .......................................................................... 12
REVISION HISTORY
9/14Rev. 0 to Rev. A
Changes to Figure 19 ........................................................................ 9
Changes to Figure 22 ...................................................................... 10
Changes to Ordering Guide .......................................................... 12
6/05Revision 0: Initial Version
Rev. A | Page 2 of 12

ADN2882A-DF

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Transimpedance Amplifiers 4.25Gbps Transimpedance Amplifier IC.
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet