DS3991
Low-Cost CCFL Controller
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16
____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Power-Supply Decoupling
To achieve best results, it is highly recommended that
a decoupling capacitor be used on pin 14, the IC
power-supply pin. Typical values of decoupling capaci-
tors are 0.01µF or 0.1µF. Use a high-quality, ceramic,
surface-mount capacitor, and mount it as close as pos-
sible to the VCC and GND pins of the IC to minimize
lead inductance. Pins 2, 3, and 4 require connection to
supply voltage (VCC) but do not require any additional
decoupling.
Package Information
For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo.
PACKAGE TYPE DOCUMENT NO.
16 SO (150 mils)
56-G2008-001
Revision History
