Data Sheet ADL5534
Rev. B | Page 3 of 16
SPECIFICATIONS
VPOS = 5 V and T
A
= 25°C, unless otherwise noted.
Table 1.
Parameter Conditions Min Typ Max Unit
OVERALL FUNCTION
Gain (S21) 190 MHz 20.4 dB
Input Return Loss (S11) 190 MHz −18.0 dB
Output Return Loss (S22) 190 MHz −29.0 dB
Reverse Isolation (S12) 190 MHz −23.0 dB
FREQUENCY = 70 MHz
Gain 21.0 dB
vs. Frequency ±5 MHz ±0.04 dB
A
vs. Supply 4.75 V to 5.25 V ±0.20 dB
Output 1 dB Compression Point 20.4 dBm
Output Third-Order Intercept ∆f = 1 MHz, output power (P
OUT
) = 0 dBm per tone 40.0 dBm
Noise Figure 2.5 dB
Device-to-Device Isolation Measured at output with input applied to alternate device −46.0 dB
FREQUENCY = 190 MHz
Gain 19.5 20.4 21 dB
vs. Temperature −40°C ≤ T
A
≤ +85°C ±0.20 dB
vs. Supply 4.75 V to 5.25 V ±0.17 dB
Output 1 dB Compression Point 20.6 dBm
Output Third-Order Intercept ∆f = 1 MHz, output power (P
OUT
)
= 0 dBm per tone 39.0 dBm
Noise Figure 2.7 dB
Device-to-Device Isolation
Measured at output with input applied to an alternate device
FREQUENCY = 380 MHz
Gain 19.0 19.8 20.5 dB
vs. Temperature −40°C ≤ T
A
≤ +85°C ±0.22 dB
vs. Supply 4.75 V to 5.25 V ±0.16 dB
Output 1 dB Compression Point 20.4 dBm
Output Third-Order Intercept ∆f = 1 MHz, output power (P
OUT
)
= 0 dBm per tone 36.0 dBm
Device-to-Device Isolation Measured at output with input applied to an alternate device −34.0 dB
POWER INTERFACE RFOUT1, RFOUT2 pins
Supply Current Per amplifier 98 110 mA
vs. Temperature −40°C ≤ T
A
≤ +85°C ±15 mA
Power Dissipation 0.5 W