ADL5534 Data Sheet
Rev. B | Page 6 of 16
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
9 NC
12 CLIN1
NC 4
10 NC
NC 2
11 NC
NC 3
ADL5534
06836-002
NC 1
13 RFOUT1
16 RFIN1
RFOUT2 8
14 NC
NC 6
15 NC
CLIN2 7
RFIN2 5
PIN 1
INDICATOR
TOP VIEW
(Not to Scale)
NOTES
1. NC = NO CONNECT.
2. THE EXPOSED PADDLE IS INTERNALLY
CONNECTED TO GND. SOLDER TO A LOW
IMPEDANCE GROUND PLANE.
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No. Mnemonic Description
1, 2, 3, 4, 6, 9,
10, 11, 14, 15
NC No Connect.
5, 16 RFIN2, RFIN1 RF Input. Requires a dc blocking capacitor. Use a 10 nF capacitor for normal operation.
7, 12 CLIN2, CLIN1
A 1 nF capacitor connected from Pin 7 to ground and Pin12 to ground provides decoupling
for the on-board linearizer.
8, 13 RFOUT2, RFOUT1
RF Output and Bias. DC bias is provided to this pin through an inductor. A 470 nH inductor is
recommended for normal operation. The RF path requires a dc blocking capacitor. Use a 10 nF
capacitor for normal operation.
Exposed Paddle GND. Solder this paddle to a low impedance ground plane.