DS80C310
22 of 22
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim
reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
REVISION HISTORY
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
090198
1)
Added note to clarify I
IL
specification.
2)
Changed serial port mode 0 timing diagram label from t
QVXL
to
t
QVXH
.
3)
Changed minimum oscillator frequency to 1MHz when using
external crystal.
4)
Corrected “Data memory write with stretch” diagrams to show
falling edge of ALE coincident with rising edge of C3 clock.
012401 1) Added errata disclaimer to page 1.
102405
1)
Device moved to qualified status. Removed “Preliminary” status
from data sheet.
2)
Removed references to 33MHz versions of the device.
3)
Added note requiring 100 machine cycles delay following stop
mode exit. This edit transfers existing erratum from errata sheet
into data sheet.
4)
Updated Absolute Maximum Ratings table to match current
format.
5)
Displayed Electrical Characteristics test conditions.
6)
Added notation that -40C specifications are guaranteed by
design but not tested.
7)
Clarified DC Electrical Characteristics note that the specification
only applies to the first clock cycle following the transition.
8)
Added lead-free part numbers to Ordering Information table.
9)
Added t
AVLL2
specification.
10)
Updated AC timing characteristics with full characterization
data.
042106
1)
Changed lead-free ordering information part numbers to
correctly reflect that the “+” comes after part numbers (e.g.,
DS80C310-MCG+).
2)
Added Note 2 to the AC Electrical Characteristics and MOVX
Characteristics tables.
13, 14
8/09 Removed additional references to 33MHz versions of the device. 1, 11
