HMC213BMS8E Data Sheet
Rev. 0 | Page 18 of 21
SPURIOUS AND HARMONICS PERFORMANCE
Mixer spurious products are measured in dBc from either the
RF pin or the IF pin output power level. N/A means not applicable.
LO Harmonics
LO = 13 dBm, and all values in dBc below input LO level and
measured at RF port. N/A means not applicable.
Table 5. LO Harmonics at RF
N × LO Spur at RF Port (dBc)
LO Frequency (GHz) 1 2 3 4
1.5 37 41 57 77
2.0 28 27 49 60
2.5 29 26 45 51
3.0 31 31 35 49
3.5 32 38 50 48
4.0 31 37 39 63
4.5 34 36 40 58
5.0 34 40 46 59
Downconverter M × N Spurious Outputs
Spur values are (M × RF) − (N × LO).
RF = 3.5 GHz at −10 dBm, LO = 3.6 GHz at 13 dBm.
N × LO
0 1 2 3 4
M × RF
0
N/A −6 +5 +17 +25
1
+6 0 +29 +37 +42
2
+63 +55 +55 +55 +66
3
+80 +78 +77 +83 +79
4
+77 +79 +79 +82 +86
Upconverter M × N Spurious Outputs
Spur values are (M × IF
IN
) + (N × LO).
IF
IN
= 100 MHz at −10 dBm, LO = 3.6 GHz at 13 dBm.
N × LO
0 1 2 3 4
M × IF
−4
88 84 82 81 77
−3
89 73 79 79 78
−2
77 51 59 64 59
−1
38 0 42 37 40
0
N/A 0 8 20 19
+1
38 0 44 36 40
+2
76 51 61 64 60
+3
90 66 79 79 79
+4
89 81 79 80 79
